usr sportster pro not always properly detected
Erik Hovland (ehovland@thorin.instanet.com)
Sat, 23 Oct 1999 09:46:10 -0700
I recently bought an external USR voice modem. Particulars:
ati7
Configuration Profile...
Product type US/Canada External
Product ID: 00560500
Options V32bis,V.34+,v.80,x2,V.90
Fax Options Class 1/Class 2.0
Line Options Caller ID, Distinctive Ring
Voice Options Speakerphone, TAD
Clock Freq 96.0Mhz
EPROM 256k
RAM 32k
FLASH date 11/17/98
FLASH rev 4.9.2
DSP date 11/17/98
DSP rev 4.9.2
USB date 11/13/98
OK
I am using this init-chat string in my mgetty.config:
ATE1Q0S0=0S13.2=1&D3
I am running mgetty v1.2.21 with the most recent patch applied as of
1999-10-09 on a debian slink distribution running the linux kernel
v2.2.13pre17. Current debug level in mgetty.config and voice.conf is 5.
Very rarely I see this beautiful message in the vg_ttyS1.log:
10/23 09:10:36 yS1 detecting voice modem type
10/23 09:10:36 yS1 voice command: 'ATI9' -> ''
10/23 09:10:37 yS1 voice command: 'ATI' -> ''
10/23 09:10:37 yS1 US Robotics detected
But usually I see this:
10/23 09:33:26 yS1 detecting voice modem type
10/23 09:33:27 yS1 voice command: 'ATI9' -> ''
10/23 09:33:28 yS1 voice command: 'ATI' -> ''
10/23 09:33:28 yS1 no voice modem detected
I am using a connect speed of 38400 (really, not 115k) per a suggestion in an
older mailing list archive but if I use any speed from 38.4k through 115k I see
the same behavior. I am willing to dig deeper into this problem but I was
hoping that someone else had run into this or could at least direct me to
where I should be looking to fix this issue.
E