[johnc@zyxel.com: New firmware for Omni 288 and Elite 2864 (L) (V.1.19)]

• Messages sorted by:[ date ][ thread ][ subject ][ author ]

I got this from Zyxel about 10 minutes after I learned about this
upgrade from their web site. Since there are so many Zyxel users on
this list, I thought I would forward the notice to all.
------- Start of forwarded message -------
Return-Path: owner-firmware-update@zyxel.com
From: John Castreje <johnc@zyxel.com>
To: "'firmware-update@zyxel.com'" <firmware-update@zyxel.com>
Subject: New firmware for Omni 288 and Elite 2864 (L) (V.1.19)
Date: Fri, 31 Oct 1997 13:22:41 -0800
X-Mailer: Microsoft Exchange Server Internet Mail Connector Version 4.12.736
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="---- =_NextPart_000_01BCE600.11C7B360"
Sender: owner-firmware-update@zyxel.com
Precedence: bulk
Reply-To: johnc@zyxel.com

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible. Contact your
mail administrator for information about upgrading your reader to a version
that supports MIME.

- ------ =_NextPart_000_01BCE600.11C7B360
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit

The new firmware is available for download at:

Omni 288
http://www.zyxel.com/html/tech/modems/tech-o288s.html

Elite 2864 (L)
http://www.zyxel.com/html/tech/modems/tech-2864.html


Released notes
=================================================

ZyXEL Communications Corporation
October 24, 1997



Release Note on Elite 2864(L) and Omni 288S, Version 1.19
==========================================================



Fixed Modem bugs:
- -----------------
 1. The "Callback Security *G2" on Elite 2864 series is now compatible with
 U1496 series.
 2. The report of Rx level is now correct.
 3. Modem will now repeat generation of answer tone in leased line v.32 mode
 when S57.1=1 is set.
 4. The Connect message format is now correct (CR,LF are were missed) when
 "+FAA=1", "+FClass=2.0" was entered.
 5. Increased stability of data transfer in sync mode.
 6. ZyXEL modem can now connect in V.34 mode with Rockwell modems (with
 chipset for K56flex protocol) if ZyXEL is calling site.

New Feature:
- ------------
 1. The Caller ID settings can be saved in NVRAM if "&Wn" is entered.
 - press D/V key then power on to do hardware reset is needed

- ------ =_NextPart_000_01BCE600.11C7B360--
------- End of forwarded message -------