Problems with mgetty at HP workstation

• Messages sorted by:[ date ][ thread ][ subject ][ author ]

Hi,

I hope someone can help me. I have a lot of problems getting
mgetty+sendfax 1.1.9 up and running at a HP9000/712 with HP-UX 10.20 and
aa ZyXEL 2864 modem. 

I have tried several combinations of the initialization parameters both HW
handshake and software handshake. My problem is that only half of a fax is
transmitted to the other fax machine (when sending a fax) and it newer
take of the hook when receiving faxes. 

I started with HW handshake both set in the device file (cul0p0 with HW
handshake), gettydefs (CRTS parameter) and in the mgetty.config and
sendfax.config files (the &H3 parameter). Then I shifted to XON/XOFF
handshake changing all the parameters. Absolutely no difference in
behaviour is seen. 

I am appending a bit of the Faxlog file from a transmission of a fax:

10/28 19:05:06 0p0 fax_send: 'ATV1Q0'
10/28 19:05:06 0p0 fax_wait_for(OK)
10/28 19:05:06 0p0 fax_wait_for: string 'ATV1Q0'
10/28 19:05:06 0p0 fax_wait_for: string 'OK'** found **
10/28 19:05:07 0p0 fax_send: 'ATM1L2'
10/28 19:05:07 0p0 fax_wait_for(OK)
10/28 19:05:07 0p0 fax_wait_for: string 'ATM1L2'
10/28 19:05:07 0p0 fax_wait_for: string 'OK'** found **
10/28 19:05:07 0p0 mdm_send: 'ATI'
10/28 19:05:08 0p0 mdm_gis: string 1: '2864'
10/28 19:05:08 0p0 mdm_identify: string '2864'
10/28 19:05:08 0p0 ZyXEL 2864(D) detected
10/28 19:05:08 0p0 mdm_send: 'ATI1'
10/28 19:05:10 0p0 mdm_gis: string 1: '62343'
10/28 19:05:11 0p0 mdm_gis: string 2: 'E2864 V 1.18  '
10/28 19:05:11 0p0 additional info: 'E2864 V 1.18  '
10/28 19:05:11 0p0 mdm_send: 'AT+FCLASS=2.0'
10/28 19:05:12 0p0 mdm_command: string 'AT+FCLASS=2.0'
10/28 19:05:12 0p0 mdm_command: string 'OK' -> OK
10/28 19:05:12 0p0 mdm_send: 'AT+FLI="+45 3545 6713"'
10/28 19:05:13 0p0 mdm_command: string 'AT+FLI="+45 3545 6713"'
10/28 19:05:13 0p0 mdm_command: string 'OK' -> OK
10/28 19:05:13 0p0 mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0'
10/28 19:05:15 0p0 mdm_command: string 'AT+FCC=1,5,0,2,0,0,0,0'
10/28 19:05:15 0p0 mdm_command: string 'OK' -> OK
10/28 19:05:15 0p0 mdm_send: 'AT+FBO=0'
10/28 19:05:16 0p0 mdm_command: string 'AT+FBO=0'
10/28 19:05:16 0p0 mdm_command: string 'OK' -> OK
10/28 19:05:16 0p0 mdm_send: 'AT+FNR=1,1,1,0'
10/28 19:05:17 0p0 mdm_command: string 'AT+FNR=1,1,1,0'
10/28 19:05:17 0p0 mdm_command: string 'OK' -> OK
10/28 19:05:17 0p0 mdm_send: 'AT+FLO=1'
10/28 19:05:18 0p0 mdm_command: string 'AT+FLO=1'
10/28 19:05:18 0p0 mdm_command: string 'OK' -> OK
10/28 19:05:18 0p0 mdm_send: 'AT&H4'
10/28 19:05:18 0p0 mdm_command: string 'AT&H4'
10/28 19:05:19 0p0 mdm_command: string 'OK' -> OK
10/28 19:05:19 0p0 fax_send: 'ATDT56713'
10/28 19:05:19 0p0 fax_wait_for(OK)
10/28 19:05:19 0p0 fax_wait_for: string 'ATDT56713'
10/28 19:05:43 0p0 fax_wait_for: string '+FCO'
10/28 19:05:44 0p0 fax_wait_for: string '+FCI:  +45 3545 6713 '
10/28 19:05:44 0p0 fax_id: '+FCI:  +45 3545 6713 '
10/28 19:05:44 0p0 fax_wait_for: string '+FIS:1,3,0,2,1,1,0,3'
10/28 19:05:45 0p0 fax_wait_for: string 'OK'** found **
10/28 19:05:45 0p0 sendfax: IGNORE DCD (carrier) status
10/28 19:05:45 0p0 fax_send_page("pbm.g3") started...
10/28 19:05:45 0p0 tio_set_flow_control( )
10/28 19:05:45 0p0 fax_send: 'AT+FDT'
10/28 19:05:45 0p0 fax_wait_for(CONNECT)
10/28 19:05:45 0p0 fax_wait_for: string 'AT+FDT'
10/28 19:05:51 0p0 fax_wait_for: string '+FCS:1,3,0,2,0,0,0,3'
10/28 19:05:51 0p0 transmission par.: '+FCS:1,3,0,2,0,0,0,3'
10/28 19:05:52 0p0 fax_wait_for: string 'CONNECT'** found **
10/28 19:05:52 0p0 tio_set_flow_control( XON_OUT )
10/28 19:05:52 0p0 sending pbm.g3...
10/28 19:05:56 0p0 input: got [0a]
10/28 19:06:54 0p0 fax_send: timeout
10/28 19:06:54 0p0 could not write all 65 bytes: No such file or
directory
10/28 19:06:54 0p0 PANIC: timeout sending fax page data, trying force
modem reset_: No such file or directory
 


If anybody could help me I will be very happy

Thanks in advance
Claus Svarer


---

      -
 _____________________________o o__________________________________________
|     L        |
| Claus Svarer   \_/       |
| Neurobiology Research Unit | Phone : +45 3545 6716    |
| National University Hospital |        |
| Rigshospitalet, build. 9201 | Fax : +45 3545 6713    |
| Blegdamsvej 9   |        |
| DK-2100 Copenhagen O  | e-mail : csvarer@pet.rh.dk   |
| Denmark    | http://neuro.pet.rh.dk/staff/csvarer.html |
|______________________________|___________________________________________|


.