mgetty on SCO OpenServer 5.0.2 (fwd)

Gert Doering (gert@greenie.muc.de)
Fri, 17 Oct 1997 07:53:46 +0200
Messages sorted by:[ date ][ thread ][ subject ][ author ]

----- Forwarded message from John Adams -----

*From florsheim.com!john.adams Fri Oct 17 00:20:39 1997
Message-Id: <1.5.4.32.19971016222036.00694cbc@exchange.florsheim.com>
X-Sender: florsheim_cntr\adams\john.adams@exchange.florsheim.com
X-Mailer: Windows Eudora Light Version 1.5.4 (32)
Date: Thu, 16 Oct 1997 17:20:36 -0500
To: gert@greenie.muc.de (Gert Doering)
From: John Adams <john.adams@florsheim.com>
Subject: Re: mgetty on SCO OpenServer 5.0.2

A good idea, but it doesn't appear to be correct. When I run cu on the
modem in question, and send it exactly what the script indicates is sent, it
replies appropriately. (e.g. OK)

It seems more like the mgetty process is not properly seizing the port, or
not properly reading the results off of it. In any case, the modem commands
are fine, the switches are appropriately set, etc. Any ideas would be
greatly appreciated...

At 11:11 PM 10/14/97 +0200, you wrote:
>Hi mgetty-list,
>
>someone out there having an idea? For me, this looks like "modem set
>[with dip switch] to dumb mode, thus no OK responses". But I'm not sure.
>USRs *do* have jumpers, but my manual is somewhere in a heap of other
>paper...
>
>(And since I do not have any time these days, I just throw the problem at
>the list and hope a solution will appear out of thin air :-) )
>
>gert
>
>----- Forwarded message from Adams, John -----
>
>>From FLORSHEIM.com!John.Adams Mon Oct 13 16:46:27 1997
>Message-ID: <EDF6C1467AF9D01195CD00A0C96E92880486C2@CHICAGO_SRV2>
>From: "Adams, John" <John.Adams@FLORSHEIM.com>
>To: "'gert@greenie.muc.de'" <gert@greenie.muc.de>
>Subject: 
>Date: Mon, 13 Oct 1997 09:46:41 -0500
>X-Priority: 3
>X-Mailer: Internet Mail Service (5.0.1458.49)
>
>Hello again. I'm back from a short vacation (didn't go anywhere, just
>didn't go to work) and am back to installing and configuring mgetty.
>Could you provide some additional assistance?
>
>Attached is mgetty log file. It appears to indicate some troubles
>handling the modem.
>
>Again, my system is SCO OpenServer 5.0.2, pretty much straight. Nothing
>unusual, nothing 3rd party. The modem is a USR 33.6, and the modem
>commands I'm sending are from my old getty's string, so should be
>effective.
>
>Any ideas?
>
><<<begin log>>>
>--
>10/13 09:43:58 y2A mgetty: official release 1.0.0
>10/13 09:43:58 y2A mgetty.c compiled at Oct 2 1997, 16:46:42
>10/13 09:43:58 y2A reading configuration data for port 'tty2A'
>10/13 09:43:58 y2A conf lib: read: 'debug 4'
>10/13 09:43:58 y2A conf lib: read: 'fax-id 49 89 xxxxxxxx'
>10/13 09:43:58 y2A conf lib: read: 'speed 38400'
>10/13 09:43:58 y2A key: 'speed', type=0, flags=3, data=38400
>10/13 09:43:58 y2A key: 'switchbd', type=0, flags=1, data=0
>10/13 09:43:58 y2A key: 'direct', type=3, flags=1, data=FALSE
>10/13 09:43:58 y2A key: 'blocking', type=3, flags=1, data=FALSE
>10/13 09:43:58 y2A key: 'port-owner', type=1, flags=1, data=uucp
>10/13 09:43:58 y2A key: 'port-group', type=1, flags=1, data=uucp
>10/13 09:43:58 y2A key: 'port-mode', type=0, flags=1, data=432
>10/13 09:43:58 y2A key: 'toggle-dtr', type=3, flags=1, data=TRUE
>10/13 09:43:58 y2A key: 'toggle-dtr-waittime', type=0, flags=1,
>data=500
>10/13 09:43:58 y2A key: 'data-only', type=3, flags=1, data=FALSE
>10/13 09:43:58 y2A key: 'fax-only', type=3, flags=1, data=FALSE
>10/13 09:43:58 y2A key: 'modem-type', type=1, flags=1, data=auto
>10/13 09:43:58 y2A key: 'init-chat', type=2, flags=1, data= \dATQ0V1H0
>OK AT&F0X7Q0&D2&C1&B1S0=0S2=043 OK 
>10/13 09:43:58 y2A key: 'force-init-chat', type=2, flags=1, data=
>\d\d\d\d+++\d\d\d
>\dATQ0V1H0 OK 
>10/13 09:43:58 y2A key: 'modem-check-time', type=0, flags=1, data=3600
>10/13 09:43:58 y2A key: 'rings', type=0, flags=1, data=1
>10/13 09:43:58 y2A key: 'get-cnd-chat', type=2, flags=0, data=(empty)
>10/13 09:43:58 y2A key: 'answer-chat', type=2, flags=1, data= ATA
>CONNECT \c 
> 
>10/13 09:43:58 y2A key: 'answer-chat-timeout', type=0, flags=1,
>data=80
>10/13 09:43:58 y2A key: 'autobauding', type=3, flags=2, data=TRUE
>10/13 09:43:58 y2A key: 'ringback', type=3, flags=1, data=FALSE
>10/13 09:43:58 y2A key: 'ringback-time', type=0, flags=1, data=30
>10/13 09:43:58 y2A key: 'ignore-carrier', type=3, flags=1, data=FALSE
>10/13 09:43:58 y2A key: 'issue-file', type=1, flags=1, data=/etc/issue
>10/13 09:43:58 y2A key: 'prompt-waittime', type=0, flags=1, data=500
>10/13 09:43:58 y2A key: 'login-prompt', type=1, flags=1, data=@!login:
>
>10/13 09:43:58 y2A key: 'login-time', type=0, flags=1, data=240
>10/13 09:43:58 y2A key: 'fido-send-emsi', type=3, flags=1, data=TRUE
>10/13 09:43:58 y2A key: 'fax-id', type=1, flags=3, data=49 89 xxxxxxxx
>10/13 09:43:58 y2A key: 'fax-server-file', type=1, flags=0,
>data=(empty)
>10/13 09:43:58 y2A key: 'diskspace', type=0, flags=1, data=1024
>10/13 09:43:58 y2A key: 'notify', type=1, flags=1, data=faxadmin
>10/13 09:43:58 y2A key: 'fax-owner', type=1, flags=1, data=uucp
>10/13 09:43:58 y2A key: 'fax-group', type=1, flags=0, data=(empty)
>10/13 09:43:58 y2A key: 'fax-mode', type=0, flags=1, data=432
>10/13 09:43:58 y2A key: 'debug', type=0, flags=2, data=9
>10/13 09:43:58 y2A key: 'statistics-chat', type=2, flags=0,
>data=(empty)
>10/13 09:43:58 y2A key: 'statistics-file', type=1, flags=0,
>data=(empty)
>10/13 09:43:58 y2A key: 'gettydefs', type=1, flags=1, data=n
>10/13 09:43:58 y2A key: 'term', type=1, flags=0, data=(empty)
>10/13 09:43:58 y2A check for lockfiles
>10/13 09:43:58 y2A checklock: stat failed, no file
>10/13 09:43:58 y2A locking the line
>10/13 09:43:58 y2A makelock(tty2A) called
>10/13 09:43:58 y2A do_makelock: lock='/usr/spool/uucp/LCK..tty2A'
>10/13 09:43:58 y2A lock made
>10/13 09:43:58 y2A lowering DTR to reset Modem
>10/13 09:43:59 y2A tss: set speed to 38400 (017)
>10/13 09:43:59 y2A tio_set_flow_control( HARD )
>10/13 09:43:59 y2A waiting for line to clear (VTIME), read: 
>10/13 09:43:59 y2A send: \dATQ0V1H0[0a][0d]
>10/13 09:44:00 y2A waiting for ``OK''
>10/13 09:44:00 y2A got: ATQ0V1H0[0a]
>10/13 09:44:00 y2A CND: ATQ0V1H0[0d]
>10/13 09:44:20 y2A timeout in chat script, waiting for `OK'
>10/13 09:44:20 y2A init chat timed out, trying force-init-chat
>10/13 09:44:20 y2A send:
>\d[10][03]\d\d\d+++\d\d\d[0d]\dATQ0V1H0[0a][0d]
>10/13 09:44:24 y2A waiting for ``OK''
>10/13 09:44:24 y2A got: [10][03]+++[0d]
>10/13 09:44:24 y2A CND: +++ATQ0V1H0[0a]
>10/13 09:44:24 y2A CND: ATQ0V1H0[0d]
>10/13 09:44:44 y2A timeout in chat script, waiting for `OK'
>10/13 09:44:44 y2A init chat failed, exiting...: Interrupted system
>call
>10/13 09:44:44 ##### failed in mg_init_data, dev=tty2A, pid=505
>
>10/13 09:44:44 y2A removing lock file
>--
><<<end log>>>
>
>John Adams
>http://homepage.interaccess.com/~jadams/index.shtml
>
>
>
>----- End of forwarded message from Adams, John -----
>
>-- 
>USENET is *not* the non-clickable part of WWW!
>           //www.muc.de/~gert/
>Gert Doering - Munich, Germany      gert@greenie.muc.de
>fax: +49-89-3545980     gert.doering@physik.tu-muenchen.de
>



----- End of forwarded message from John Adams -----

-- 
USENET is *not* the non-clickable part of WWW!
           //www.muc.de/~gert/
Gert Doering - Munich, Germany      gert@greenie.muc.de
fax: +49-89-3545980     gert.doering@physik.tu-muenchen.de
.