two page fax fail - DLE problem?
Garry Wright (wrightdg@brunet.bn)
Sat, 04 Oct 1997 07:47:55 +0800
mgetty on USR outboard 33.6 Sportster, Pentium, RedHat 4.1 with linux
2.0.29
Receives fine. Sends single page faxes without error. Always fails at
the end of first page as in the following log on multi-page faxes. Tried
the fix of 'ignore-carrier y' suggested for Mike Elliot with no joy.
Have tried assorted combinations with USR yes/no and so on. Can anyone
help on this please?
10/04 01:56:16 yS0 fax_wait_for(OK)
10/04 01:56:16 yS0 fax_wait_for: string 'ATV1Q0'
10/04 01:56:16 yS0 fax_wait_for: string 'OK'** found **
10/04 01:56:17 yS0 mdm_send: 'AT+FCLASS=2.0'
10/04 01:56:17 yS0 mdm_command: string 'AT+FCLASS=2.0'
10/04 01:56:17 yS0 mdm_command: string 'OK' -> OK
10/04 01:56:17 yS0 mdm_send: 'AT+FLI="673 2 392873"'
10/04 01:56:17 yS0 mdm_command: string 'AT+FLI="673 2 392873"'
10/04 01:56:17 yS0 mdm_command: string 'OK' -> OK
10/04 01:56:17 yS0 mdm_send: 'AT+FCC=1'
10/04 01:56:17 yS0 mdm_command: string 'AT+FCC=1'
10/04 01:56:17 yS0 mdm_command: string 'OK' -> OK
10/04 01:56:17 yS0 mdm_send: 'AT+FBO=0'
10/04 01:56:17 yS0 mdm_command: string 'AT+FBO=0'
10/04 01:56:17 yS0 mdm_command: string 'OK' -> OK
10/04 01:56:17 yS0 mdm_send: 'AT+FNR=1,1,1,0'
10/04 01:56:17 yS0 mdm_command: string 'AT+FNR=1,1,1,0'
10/04 01:56:17 yS0 mdm_command: string 'OK' -> OK
10/04 01:56:17 yS0 mdm_send: 'AT+FLO=1'
10/04 01:56:17 yS0 mdm_command: string 'AT+FLO=1'
10/04 01:56:18 yS0 mdm_command: string 'OK' -> OK
10/04 01:56:18 yS0 fax_send: 'ATD393357'
10/04 01:56:18 yS0 fax_wait_for(OK)
10/04 01:56:18 yS0 fax_wait_for: string 'ATD393357'
10/04 01:56:37 yS0 fax_wait_for: string '+FCO'
10/04 01:56:40 yS0 fax_wait_for: string '+FCI:" 673 2 393357"'
10/04 01:56:40 yS0 fax_id: '+FCI:" 673 2 393357"'
10/04 01:56:40 yS0 fax_wait_for: string '+FIS:1,3,0,2,1,0,0,5'
10/04 01:56:40 yS0 fax_wait_for: string 'OK'** found **
10/04 01:56:40 yS0 sendfax: honouring DCD (carrier) drops now
10/04 01:56:40 yS0 fax_send_page("test.g3.1") started...
10/04 01:56:40 yS0 tio_set_flow_control( )
10/04 01:56:40 yS0 fax_send: 'AT+FDT'
10/04 01:56:40 yS0 fax_wait_for(CONNECT)
10/04 01:56:40 yS0 fax_wait_for: string 'AT+FDT'
10/04 01:56:40 yS0 fax_wait_for: string '+FCS:1,3,0,2,0,0,0,5'
10/04 01:56:40 yS0 transmission par.: '+FCS:1,3,0,2,0,0,0,5'
10/04 01:56:46 yS0 fax_wait_for: string 'CONNECT'** found **
10/04 01:56:46 yS0 tio_set_flow_control( XON_OUT )
10/04 01:56:46 yS0 sending test.g3.1...
10/04 01:56:46 yS0 skipping over GhostScript header
10/04 01:56:53 yS0 page complete, 14519 bytes sent
10/04 01:56:53 yS0 sending DLE ','
10/04 01:57:00 yS0 mdm_read_byte: read returned 0: Unknown error
10/04 01:57:00 yS0 mdm_get_line: cannot read byte, return: Unknown
error
10/04 01:57:00 ##### failed transmitting test.g3.1: phone="393357",
+FHS:-5, dev=ttyS0, time=42s, acct=""
10/04 01:57:01 yS0 fax_send: 'AT+FCLASS=0'
10/04 01:57:01 yS0 fax_send: cannot write: I/O error
10/04 01:57:01 yS0 removing lock fil
--
Garry Wright
Ph. 673 8 713519 Fax: 673 2 392873
email: wrightdg@brunet.bn
PGP Public Key available on request.
.