vgetty + Omni56k

Gert Doering (gert@greenie.muc.de)
Thu, 19 Aug 1999 22:25:11 +0200


Hi,

On Wed, Aug 18, 1999 at 08:59:52PM +0200, Marc SCHAEFER wrote:
> In article <19990818185457.C790@greenie.muc.de> you wrote:
> > (Marc, if you need, I can send you the "mid" output of the Omni 56k+)
> 
> if you can, please do. Else the guy sent me the debuglevel 9 output
> and I got the ATI (1500) and also the PNP ID.

Here you go...:

From: "Roeland Th. Jansen" <omni90@grobbebol.xs4all.nl>
[..]

testing for modem on /dev/ttyP40 with 38400 bps...
>>> ATI
ATI
1500

OK
>>> ATI0
ATI0
1500

OK
>>> ATI1
ATI1
43690
Omni56K Plus  0.50h
1999 07 12 18:00

OK
>>> ATI2
ATI2

   ZyXEL MODEMS LINK STATUS REPORT

   Chars Sent             0     Chars Received           0
   Octets Sent            0     Octets Received          0
   Blocks Sent            0     Blocks Received          0
   Blocks Resent          0     Max Outstanding          0
   Max Block Size         0     Retrains Requested       0
   Link Duration          0     Retrains Granted         0
   FRN Requested          0     FRN Granted              0
   FCS Errors             0     Round Trip Delay         0
   Xmitter Underrun       0     Receiver Overrun         0

   Last Speed/Protocol     14400

   Disconnect Reason     Local hang up=20

OK
>>> ATI3
ATI3
ZyXEL V.90 0.50h

OK
>>> ATI4
ATI4
V.90 Fax Modem

OK
>>> ATI5
ATI5
OK
>>> ATI6
ATI6
OK
>>> ATI7
ATI7
OK
>>> ATI8
ATI8
OK
>>> ATI9
ATI9
(=01$ZYX56FF\00000000\MODEM\\  Omni56K Plus  0.50h    12)

OK
>>> ATI10
ATI10
OK
>>> ATI11
ATI11
OK
>>> ATI12
ATI12
   ZyXEL MODEMS PHYSICAL LAYER STATUS REPORT

   Modulation mode   =3D     V32b
   Tx Carrier        =3D        0 Hz       Rx Carrier            =3D     =
   0 Hz
   Tx Baud Rate      =3D     2400 Baud     Rx Baud Rate          =3D     =
2400 Baud
   Tx Bit Rate       =3D    14400 bps      Rx Bit Rate           =3D    1=
4400 bps
   Tx Power          =3D     0.00 dBm      Rx Level              =3D   -3=
7.50 dBm
   Phase Jitter      =3D     0.00 degree   Frequency Offset      =3D     =
0.00 Hz
   SNR               =3D     9.00 dB       Round Trip Delay      =3D     =
0.00 ms
   Near End Echo     =3D  -119.39 dB       Far End Echo          =3D  -11=
8.80 dB
   Nonlinear Encoder =3D      OFF          Nonlinear Decoder     =3D     =
 OFF=20
   Tx Shaping        =3D      Min          Rx Shaping            =3D     =
 Min=20
   Trellis Encoder   =3D        0 state    Convolutional Decoder =3D     =
   0 state
   Tx Filter Index   =3D        0          Remote Tx Filter Index=3D     =
   0=20
   Tx Precoder Coefficients          =3D 0000  0000  0000  0000  0000  00=
00 =20
   Remote Tx Precoder Coefficients   =3D 0000  0000  0000  0000  0000  00=
00 =20

OK
>>> ATI13
ATI13
    -0=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
    -2=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
    -4=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
    -6=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
    -8=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
   -10=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
   -12=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
   -14=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
   -16=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
   -18=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
   -20=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
   -22=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
   -24=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
   -26=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
   -28=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
   -30=B4 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2 =B2=
 =B2 =B2 =B2 =B2 =B2=20
   dB =C0=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=
=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4
      F 0 0 0 0 0 1 1 1 1 1 2 2 2 2 2 3 3 3 3 3 3    L1 Power:    0.00
      R 1 3 4 6 7 0 3 5 6 9 1 2 5 7 8 0 1 3 4 6 7    L2 Power:    0.00
      E 5 0 5 0 5 5 5 0 5 5 0 5 5 0 5 0 5 0 5 0 5    S/N:         0.00
      Q 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0=20
OK
>>> ATI14
ATI14
   ZyXEL MODEMS V.90 CAPABILITY REPORT

   Local  Modem V.90 Capability  =3D  None
   Local  Modem PSTN Connection  =3D  Analogue
   Remote Modem V.90 Capability  =3D  None
   Remote Modem PSTN Connection  =3D  Analogue
   Probing Report of APCM modem  =3D  V.34

OK
>>> ATI15
ATI15
   ZyXEL MODEMS V.90 POWER MANAGEMENT REPORT

   DPCM nominal tx power for phase 2  :     -0.00  dBm
   DPCM actual  tx power for phase 2  :     -0.00  dBm
   Maximum DPCM tx power for phase 3  :     -0.00  dBm
   Maximum DPCM tx power measured at  :  Terminal
   Digital PAD loss                   :      0.00  dB
   IMD value measured at phase 2      :      0000
   DPCM tx power reduction for IMD    :      0.00  dB
   APCM receive power at Phase 2      :      0.00  dBm
   APCM receive power at TRN1d        :      0.00  dBm
   APCM receive power at Data State   :    -37.30  dBm
----------------------------------------------------------------
   DPCM Terminal tx power             :     -0.00  dBm
   DPCM Codec tx power                :     -0.00  dBm

OK
>>> AT+FCLASS=3D?
AT+FCLASS=3D?
0,1,2.0,8

OK
>>> AT+FMFR?
AT+FMFR?
ERROR
>>> AT+FMDL?
AT+FMDL?
ERROR
>>> AT+FREV?
AT+FREV?
ERROR
>>> AT+FMI?
AT+FMI?
ZyXEL

OK
>>> AT+FMM?
AT+FMM?
Omni56K Plus

OK
>>> AT+FMR?
AT+FMR?
0.50h

OK
>>> AT+GMI?
AT+GMI?
ERROR
>>> AT+GMM?
AT+GMM?
ERROR
>>> AT+GMR?
AT+GMR?
ERROR
>>> AT+GCAP?
AT+GCAP?
ERROR



-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert@greenie.muc.de
fax: +49-89-35655025                        gert.doering@physik.tu-muenchen.de