mgetty ftp site?

• Messages sorted by:[ date ][ thread ][ subject ][ author ]

Hi,

trevor@cyberspc.mb.ca wrote:
> Hello again!  I've run into some weirdness in my mgetty log:
> 
> 07/19 15:21:38 ty1  non-numeric ID string: 'ATS0=0Q0&D3&C1'
> 07/19 15:21:38 ty1  mdm_send: 'AT+FCLASS=2.0' -> OK

The modem claims "I can do class 2.0".

> 07/19 15:21:38 ty1  mdm_send: 'AT+FAA=1;+FCR=1' -> ERROR
> 07/19 15:21:38 ty1  cannot set answer/reception flags
> 07/19 15:21:38 ty1  mdm_send: 'AT+FBO=1' -> OK
> 07/19 15:21:38 ty1  mdm_send: 'AT+FNR=1,1,1,0' -> ERROR
> 07/19 15:21:38 ty1  mdm_send: 'AT+FLI="204 275 1722"' -> ERROR
> 07/19 15:21:38 ty1  cannot set local fax id. Huh?
> 07/19 15:21:39 ty1  mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0' -> ERROR
> 07/19 15:21:39 ty1  mdm_send: 'AT+FCC=1,3,0,2,0,0,0,0' -> ERROR
> 07/19 15:21:39 ty1  huh? Cannot set +FDCC parameters

But doesn't understand *any* of the 2.0 commands.

Most likely, the modem can only do class 2, but its command parser is too
braindead to notice the error.

Set "modem-type cls2" in mgetty.config to fix this.

> What's all this about then?  Is it important?  I've noticed that I've
> been getting lots of incoming failed faxes that I'm almost positive are
> supposed to be data calls.  

That's the next problem with dumb modems: inabilitiy to properly
distinguish fax and data calls.  See my rant in the docs about those...

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert@greenie.muc.de
fax: +49-89-35655025                        gert.doering@physik.tu-muenchen.de