CLASS 2 MODEM SCAM
Mario Becroft (mb@tos.pl.net)
Wed, 8 Jul 1998 09:52:18 +0200
On Sat, 4 Jul 1998, Gert Doering wrote:
> Mario Becroft wrote:
> > different modems claiming to be class 2 before I finally hit upon one that
> > really was. The two bad modems were KTX and Dynalink. The one that finally
> > turned out to be truly class 2 was a US Robotics Sportster which has been
> > working perfectly for fax ever since (despite all the problems other
> > people seem to have with this model).
>
> Could you please send me the exact version infos (ATI, ATI7, ...) of this
> Sportster? It seems that *very recent* Sportsters have started working
> again.
I seem to remember sending that info before. Anyway here is the result of
all the ATI commands. If there is something else I am supposed to include
please tell me.
--
ati0
3362
OK
ati1
B9C9
OK
ati2
OK
OK
ati3
U.S. Robotics Sportster Flash 33600 Rev.10.3.81
OK
ati4
U.S. Robotics Sportster Flash Settings...
B0 E1 F1 L2 M1 Q0 V1 X4 Y3
BAUD=38400 PARITY=N WORDLEN=8
DIAL=TONE ON HOOK
&A3 &B1 &C1 &D2 &H1 &I0 &K1
&M4 &N0 &P0 &R2 &S0 &T5 &U0 &Y1
S00=000 S01=000 S02=043 S03=013 S04=010 S05=008 S06=002
S07=060 S08=002 S09=006 S10=014 S11=070 S12=050 S13=000
S15=000 S16=000 S18=000 S19=000 S21=010 S22=017 S23=019
S25=005 S27=000 S28=008 S29=020 S30=000 S31=128 S32=002
S33=000 S34=000 S35=000 S36=014 S38=000 S39=000 S40=000
S41=004 S42=000
LAST DIALED #:
OK
ati5
U.S. Robotics Sportster Flash NVRAM Settings...
Template Y0
DIAL=TONE B0 E1 F1 L2 M1 Q0 V1 X1
BAUD=38400 PARITY=N WORDLEN=8
&A1 &B0 &C1 &D2 &H0 &I0 &K1 &M4 &N0
&P0 &R1 &S0 &T5 &U0 &Y1
S00=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=060
S08=002 S09=006 S10=014 S11=070 S12=050 S13=000 S15=000
S19=000 S21=010 S22=017 S23=019 S25=005 S27=000 S28=008
S29=020 S30=000 S31=128 S32=002 S33=000 S34=000 S35=000
S36=014 S38=000 S39=000 S40=000 S41=004 S42=000
Strike a key when ready . . .
Template Y1
DIAL=PULSE B0 E1 F1 L2 M1 Q0 V1 X4
BAUD=38400 PARITY=N WORDLEN=8
&A3 &B1 &C1 &D2 &H2 &I2 &K1 &M4 &N0
&P1 &R1 &S0 &T5 &U0 &Y1
S00=000 S02=043 S03=013 S04=010 S05=008 S06=002 S07=060
S08=003 S09=006 S10=014 S11=070 S12=050 S13=000 S15=000
S19=000 S21=010 S22=017 S23=019 S25=005 S27=000 S28=008
S29=020 S30=000 S31=128 S32=002 S33=000 S34=000 S35=000
S36=014 S38=000 S39=011 S40=002 S41=004 S42=000
STORED PHONE #0:
#1:
#2:
#3:
OK
ati6
U.S. Robotics Sportster Flash Link Diagnostics...
Chars sent 0 Chars Received 0
Chars lost 0
Octets sent 0 Octets Received 0
Blocks sent 0 Blocks Received 0
Blocks resent 0
Retrains Requested 0 Retrains Granted 0
Line Reversals 0 Blers 0
Link Timeouts 0 Link Naks 0
Data Compression NONE
Equalization Long
Fallback Enabled
Last Call 00:00:00
No Connection
OK
ati7
Configuration Profile...
Product type Asean External
Product ID: xx114003
Options V32bis,V.34+
Fax Options Class 1/Class 2.0
Voice Options Speakerphone, TAD
Clock Freq 92.0Mhz
EPROM 256k
RAM 32k
FLASH date 10/9/97
FLASH rev 10.3.81
DSP date 10/9/97
DSP rev 10.3.81
PTT Approval rev 1.0.0
OK
ati8
Blacklist
Time: 04:51:22
Dialed Numbers: Inactive
Dial Attempts: Inactive
OK
ati9
(1.0USR0007\\Modem\PNPC107\Sportster 33600 FAX/VOICE EXT)FF
OK
ati10
ERROR
ati11
U.S. Robotics Sportster Flash Link Diagnostics...
Modulation Unknown Speed
Carrier Freq (Hz)
Symbol Rate
Trellis Code
Nonlinear Encoding
Precoding
Shaping
Preemphasis (-dB)
Recv/Xmit Level (-dBm)
Near Echo Loss (dB)
Far Echo Loss (dB)
Carrier Offset (Hz)
Round Trip Delay (msec)
Timing Offset (ppm)
SNR (dB)
Status :
OK
--
Fax seems to work well on this modem with mgetty, I have been able to send
and receive faxes without problems. I don't use the fax a lot, but so far
it has worked fine.
--
| Mario Becroft | Tariland, Atari user group in New Zealand |
| mb@tos.pl.net | tariland@tos.pl.net |
| http://www.pl.net/~mario/ | http://www.pl.net/~mario/tariland/ |