mgetty 1.1.14 (aus redhat 5.2) und Courier I-Modem

Gerhard Zuber (zuber@berlin.snafu.de)
Sun, 25 Apr 1999 13:36:43 +0200
Messages sorted by:[ date ][ thread ][ subject ][ author ]
hallo,

ich habe hier ein Courier I-Modem mit dem auf dem 3com-Server verf=FCgbarem
neuesten Firmware-Level (mit V.90-Server)

Es treten beim Senden an Gegenstellem mit Rockwell-Modems folgende Probleme
auf:
sendfax bricht mit unexpected hangup ab, wenn die eigentliche Seite mit=
 14400
begonnen wird zu senden.


04/25 13:22:40  sendfax: experimental test release 1.1.14-Apr02
04/25 13:22:40   sendfax.c compiled at Oct 12 1998, 20:54:18
04/25 13:22:40  sending fax to 311125
04/25 13:22:40  checking f1.g3
04/25 13:22:40   makelock(ttyS2) called
04/25 13:22:40   do_makelock: lock=3D'/var/lock/LCK..ttyS2'
04/25 13:22:40   lock made
04/25 13:22:40   tss: set speed to 38400 (017)
04/25 13:22:40   tio_set_flow_control( HARD )
04/25 13:22:40 yS2   fax_open_device succeeded, ttyS2 -> 4
04/25 13:22:40 yS2   reading specific data for port 'ttyS2'
04/25 13:22:40 yS2   reading /etc/mgetty+sendfax/sendfax.config...
04/25 13:22:40 yS2   conf lib: read: 'verbose y'
04/25 13:22:40 yS2   conf lib: read: 'debug 5'
04/25 13:22:40 yS2   conf lib: read: 'fax-devices ttyS2'
04/25 13:22:40 yS2   conf lib: read: 'fax-id 49 3381 311125'
04/25 13:22:40 yS2   conf lib: read: 'max-tries 3'
04/25 13:22:40 yS2   conf lib: read: 'max-tries-continue y'
04/25 13:22:40 yS2   key: 'fax-devices', type=3D1, flags=3D4, data=3D(ignore=
d)
04/25 13:22:40 yS2   key: 'modem-init', type=3D1, flags=3D0, data=3D(empty)
04/25 13:22:40 yS2   key: 'modem-handshake', type=3D1, flags=3D0,=
 data=3D(empty)
04/25 13:22:40 yS2   key: 'modem-type', type=3D1, flags=3D1, data=3Dauto
04/25 13:22:40 yS2   key: 'modem-quirks', type=3D0, flags=3D0, data=3D(empty=
)
04/25 13:22:40 yS2   key: 'max-tries', type=3D0, flags=3D3, data=3D3
04/25 13:22:40 yS2   key: 'max-tries-continue', type=3D3, flags=3D3,=
 data=3DTRUE
04/25 13:22:40 yS2   key: 'speed', type=3D0, flags=3D1, data=3D38400
04/25 13:22:40 yS2   key: 'switchbd', type=3D0, flags=3D1, data=3D0
04/25 13:22:40 yS2   key: 'open-delay', type=3D0, flags=3D0, data=3D(empty)
04/25 13:22:40 yS2   key: 'ignore-carrier', type=3D3, flags=3D1, data=3DFALS=
E
04/25 13:22:40 yS2   key: 'dial-prefix', type=3D1, flags=3D1, data=3DATD
04/25 13:22:40 yS2   key: 'fax-id', type=3D1, flags=3D3, data=3D49 3381=
 311125
04/25 13:22:40 yS2   key: 'poll-dir', type=3D1, flags=3D1, data=3D.
04/25 13:22:40 yS2   key: 'normal-res', type=3D3, flags=3D1, data=3DFALSE
04/25 13:22:40 yS2   key: 'debug', type=3D0, flags=3D3, data=3D5
04/25 13:22:40 yS2   key: 'verbose', type=3D3, flags=3D2, data=3DTRUE
04/25 13:22:40 yS2   key: '', type=3D3, flags=3D1, data=3DFALSE
04/25 13:22:40 yS2   key: 'page-header', type=3D1, flags=3D0, data=3D(empty)
04/25 13:22:40 yS2   key: '', type=3D3, flags=3D1, data=3DFALSE
04/25 13:22:40 yS2   key: '', type=3D3, flags=3D1, data=3DFALSE
04/25 13:22:40 yS2   key: '', type=3D1, flags=3D1, data=3D
04/25 13:22:40 yS2   tss: set speed to 38400 (017)
04/25 13:22:41 yS2  mdm_send: 'ATV1Q0'
04/25 13:22:41 yS2   mdm_command: string 'ATV1Q0'
04/25 13:22:41 yS2   mdm_command: string 'OK' -> OK
04/25 13:22:41 yS2  mdm_send: 'ATI'
04/25 13:22:41 yS2   mdm_gis: string 1: '6401'
04/25 13:22:41 yS2   mdm_identify: string '6401'
04/25 13:22:41 yS2  USR I-Modem detected
04/25 13:22:41 yS2  mdm_send: 'ATI3'
04/25 13:22:41 yS2   mdm_gis: string 1: 'USRobotics Courier I-Modem with
ISDN/V.34'
04/25 13:22:41 yS2  additional info: 'USRobotics Courier I-Modem with
ISDN/V.34'
04/25 13:22:41 yS2  mdm_send: 'AT+FCLASS=3D2.0'
04/25 13:22:41 yS2   mdm_command: string 'AT+FCLASS=3D2.0'
04/25 13:22:41 yS2   mdm_command: string 'OK' -> OK
04/25 13:22:41 yS2  mdm_send: 'AT+FLI=3D"49 3381 311125"'
04/25 13:22:41 yS2   mdm_command: string 'AT+FLI=3D"49 3381 311125"'
04/25 13:22:41 yS2   mdm_command: string 'OK' -> OK
04/25 13:22:41 yS2  mdm_send: 'AT+FCC=3D1,5,0,2,0,0,0,0'
04/25 13:22:41 yS2   mdm_command: string 'AT+FCC=3D1,5,0,2,0,0,0,0'
04/25 13:22:41 yS2   mdm_command: string 'OK' -> OK
04/25 13:22:42 yS2  mdm_send: 'AT+FBO=3D0'
04/25 13:22:42 yS2   mdm_command: string 'AT+FBO=3D0'
04/25 13:22:42 yS2   mdm_command: string 'OK' -> OK
04/25 13:22:42 yS2  mdm_send: 'AT+FNR=3D1,1,1,0'
04/25 13:22:42 yS2   mdm_command: string 'AT+FNR=3D1,1,1,0'
04/25 13:22:42 yS2   mdm_command: string 'OK' -> OK
04/25 13:22:42 yS2  mdm_send: 'AT+FLO=3D2'
04/25 13:22:42 yS2   mdm_command: string 'AT+FLO=3D2'
04/25 13:22:42 yS2   mdm_command: string 'OK' -> OK
04/25 13:22:42 yS2  fax_send: 'ATD311125'
04/25 13:22:42 yS2  fax_wait_for(OK)
04/25 13:22:42 yS2   fax_wait_for: string 'ATD311125'
04/25 13:22:45 yS2   fax_wait_for: string 'RINGING'
04/25 13:22:57 yS2   fax_wait_for: string '+FCO'
04/25 13:22:59 yS2   fax_wait_for: string '+FCI:"      49 3381 311125"'
04/25 13:22:59 yS2  fax_id: '+FCI:"      49 3381 311125"'
04/25 13:22:59 yS2   fax_wait_for: string '+FIS:1,5,0,2,0,0,0,0'
04/25 13:22:59 yS2   fax_wait_for: string 'OK'** found **
04/25 13:22:59 yS2  sendfax: honouring DCD (carrier) drops now
04/25 13:22:59 yS2   fax_send_page("f1.g3") started...
04/25 13:22:59 yS2   tio_set_flow_control( HARD )
04/25 13:23:00 yS2  fax_send: 'AT+FDT'
04/25 13:23:00 yS2  fax_wait_for(CONNECT)
04/25 13:23:00 yS2   fax_wait_for: string 'AT+FDT'
04/25 13:23:00 yS2   fax_wait_for: string '+FCS:1,5,0,2,0,0,0,0'
04/25 13:23:00 yS2  transmission par.: '+FCS:1,5,0,2,0,0,0,0'
04/25 13:23:02 yS2  mdm_read_byte: read returned 0: Success
04/25 13:23:02 yS2  mdm_get_line: cannot read byte, return: Success
04/25 13:23:02 yS2  AT+FDT -> some error (-5), abort fax send!
04/25 13:23:02 ##### failed transmitting f1.g3: phone=3D"311125", +FHS:-5,
dev=3DttyS2, time=3D20s, acct=3D""

04/25 13:23:02 yS2  tio: cannot flush queue: Input/output error
04/25 13:23:02 yS2  fax_send: 'AT+FCLASS=3D0'
04/25 13:23:02 yS2  fax_send: cannot write: Input/output error
04/25 13:23:02 yS2  tio: cannot flush queue: Input/output error
04/25 13:23:02 yS2   removing lock file


Sincerely Yours / Mit freundlichen Gr=FC=DFen:   Gerhard Zuber
----------------------------------------------------------
Dipl.-Ing. Gerhard Zuber    Telefon: (030) 861 32 01
Pfalzburger Str. 25
10719 Berlin               Internet: zuber@berlin.snafu.de
Germany                       phone: +49.30.8613201
----------------------------------------------------------
Meine Meinung ist immer die meinige. My opinions are always my own.