voice -> data transition

• Messages sorted by:[ date ][ thread ][ subject ][ author ]

-----Original Message-----
From: Brian McGovern <bmcgover@cisco.com>
To: Brian Dawson <b-dawson@tronicplanet.de>
Cc: mgetty@muc.de <mgetty@muc.de>
Date: Wednesday, April 21, 1999 10:01 PM
Subject: Re: voice -> data transition


>Did you try generating a DTMF digit or data calling tone after the voice
>OGM started playing? Thats what the default vgetty is designed to do.
> -Brian

I setup a dialin connection to use a DTMF digit after the OGM has played. It
then gives me the output below. Right after the "got: ", I get a busy signal
and the connection dies.  It seems as though it goes into fax mode now
instead of data mode even though I have configured the voice.conf file as
voice:data:fax.

Any comments or suggestions would be appreciated.

Brian

04/22 16:55:22 dem   voice command: 'AT#CLS?' -> ''
04/22 16:55:23 dem   voice command: '' -> 'OK'
04/22 16:55:23 dem   voice command: 'AT#CLS=8' -> 'OK'
04/22 16:55:23 dem   voice command: 'AT' -> 'OK'
04/22 16:55:23 dem   voice command: 'AT#VLS=0' -> 'OK|VCON'
04/22 16:55:23 dem   voice command: 'AT#VLS=4A' -> 'VCON'
04/22 16:55:23 dem  playing voice file
/var/spool/voice/messages/message1.rmd
04/22 16:55:23 dem   vgetty: raw modem data header found
04/22 16:55:23 dem   vgetty: modem type US Robotics found
04/22 16:55:23 dem   vgetty: compression method 0x0001, speed 8000, bits 1
04/22 16:55:23 dem   voice command: 'AT' -> 'OK'
04/22 16:55:24 dem   tio_set_flow_control( HARD XON_OUT )
04/22 16:55:24 dem   voice command: 'ATE0#VTX' -> 'CONNECT'
04/22 16:55:29 dem   voice command: '' -> 'OK|VCON'
04/22 16:55:32 dem   voice command: 'AT' -> 'OK'
04/22 16:55:32 dem   voice command: 'AT#VTS=[933,0,15]' -> ''
04/22 16:55:32 dem   voice command: '' -> 'OK'
04/22 16:55:33 dem   voice command: 'AT#VLS=4A' -> 'VCON'
04/22 16:55:34 dem  recording voice file
/var/spool/voice/incoming/va06614.rmd
04/22 16:55:34 dem   voice command: 'AT' -> 'OK'
04/22 16:55:34 dem   tio_set_flow_control( HARD XON_IN )
04/22 16:55:34 dem   voice command: 'AT#VRX' -> 'CONNECT'
04/22 16:55:46 dem   voice command: '' -> 'OK|VCON'
04/22 16:55:46 dem   voice command: 'AT#CLS=2.0' -> 'OK'
04/22 16:55:46 dem   voice command: 'AT' -> 'OK'
04/22 16:55:46 dem   voice command: 'AT+FCLASS=2.0' -> 'OK'
04/22 16:55:47 dem   voice command: 'AT+FAA=1' -> 'OK'
04/22 16:55:47 dem   vgetty: Restoring signal handlers
04/22 16:55:47 dem  mdm_send: 'AT+FBO=1'
04/22 16:55:47 dem   mdm_command: string 'OK' -> OK
04/22 16:55:47 dem  send: ATA[0d]
04/22 16:55:47 dem  waiting for ``CONNECT''
04/22 16:55:47 dem   got: