"mgetty" Stalled when Printing Welcome Message - /etc/issue.net
kwong (hingkwongyu@cuhk.edu.hk)
Tue, 20 Apr 1999 08:36:16 +0000
This is a multi-part message in MIME format.
--------------89A9E1DE8BEABECD1304ED49
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable
Hi, everybody,
I 'm running Redhat Linux 5.1 with kernel 2.0.36-7 on a Dell OptiPlex
GXi PC - an
Intel 200 MHzs Pentium Box with 32MB RAM, trying on a setup for
dial-in data
connection with my home PC - another Pentium Linux Box , using "minicom
" as
a dial-in communication program/package. On the server side, Zoltrix
High-Speed
(14.4kbs) Fax/Modem card is used , and where on the calling side,
Speed 56k flex
external SAVD modem is connected to my home PC - the client in this
case.
The dial-in process is quite smooth until "mgetty" is printing out
mid-way of the
welcome message, file /etc/issue.net, to my home PC, at the moment
that after the
'answer-chat ' --> "" ATA\r CONNECT \c <--
and before the ' login prompt ' is given.
What a mercy if someone could give hints to solve my problem ?
P.S. Log file with only 2 invocations of the dial-in process,
/var/log_mg.ttyS1.mgetty, and
configuration file for mgetty,
/etc/mgetty+sendfax/mgetty.config.Apl19 is attached
for your information.
I'm please and ready to render further information on your
specific requests.
End of E-mail
NNNN
#### -------------------------------------------------------------
#
# mgetty configuration file
#
# this is a sample configuration file, see mgetty.info for details
#
# comment lines start with a "#", empty lines are ignored
# ----- global section -----
#
# In this section, you put the global defaults, per-port stuff is below
# set the global debug level to "4" (default from policy.h)
debug 4
# set the local fax station id
##fax-id 49 89 xxxxxxxx
# access the modem(s) with 38400 bps
speed 38400
# use these options to make the /dev/tty-device owned by "uucp.uucp"
# and mode "rw-rw-r--" (0664). *LEADING ZERO NEEDED!*
port-owner uucp
port-group uucp
port-mode 0664
# ----- port specific section -----
#
# Here you can put things that are valid only for one line, not the
others
#
## Zoltrix High-Speed (14.4k bts) Fax/Modem, try data only : (max. speed
19200)
port ttyS1
debug 9
data-only y
speed 9600
## --> Settings suggested by faqsample.config <-- ##
modem-type data
login-time 160
issue-file /etc/issue.net
answer-chat "" ATA CONNECT \c
answer-chat-timeout 100
# Got this init chat from Len Ovens (len@studio.cbbs.org).
# You need the init-chat even for *dial-in*. This is the recommended
way
# to init your modem.
## <<<<<<<<<<<<<<<<<<<<<< End of faqsample.config
>>>>>>>>>>>>>>>>>>>>>>>>>>>> ##
init-chat "" \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3\r OK\r AT&K3W0S7=3D60\r
OK\r
## -------- Some options for Rockwell Chip used by MODEM
-------- ##
## speed 38400
## switchbd 19200
ignore-carrier y
toggle-dtr n
## login-time 300
## prompt-waittime 2000
## answer-chat-timeout 80
term vt100
#########################################################################=
###
# direct connection of a VT100 terminal which doesn't like DTR drops
#
port ttyS0
direct y
# speed 19200
speed 115200
## toggle-dtr n
ignore-carrier y
login-time 160
issue-file /etc/issue.net
login-prompt Dell-hkpc\t\t\D\t\I-LINE\t\S bps\n\rEnter your
username:
#### ------------------------------------------------------
#
# mgetty log file : /var/log/log_mg.ttyS1.mgetty
#
### Started on Apl.19, 1999 after 17:15hrs
### Debug level 9
--
04/20 07:35:09 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:09 yS1 check for lockfiles
04/20 07:35:09 yS1 checklock: no active process has lock, will remove
04/20 07:35:09 yS1 locking the line
04/20 07:35:09 yS1 makelock(ttyS1) called
04/20 07:35:09 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:09 yS1 lock made
04/20 07:35:09 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:09 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:35:09 yS1 tss: set speed to 9600 (015)
04/20 07:35:09 yS1 tio_set_flow_control( HARD )
04/20 07:35:09 yS1 waiting for line to clear (VTIME), read:
[16][10][02]"[01][02][01][06][01][00][00][00][00][ff][02][01][03][03][01]=
[08][04][02]@[00][08][01][93][09][01][1d][0c][02][03]=3D[0d][02][ff][ff][=
10][03][c8]v
04/20 07:35:10 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:13 yS1 waiting for ``OK_''
04/20 07:35:13 yS1 got:
[16][10][02]"[01][02][01][06][01][00][00][00][00][ff][02][01][03][03][01]=
[08][04][02]@[00][08][01][93][09][01][1d][0c][02][03]=3D[0d]
04/20 07:35:13 yS1 CND:
___"_____[02][ff][ff][10][03][c8]v[16][10][02]"[01][02][01][06][01][00][0=
0][00][00][ff][02][01][03][03][01][08][04][02]@[00][08][01][93][09][01][1=
d][0c][02][03]=3D[0d]
04/20 07:35:13 yS1 CND: ______v___"_____[02][ff][ff][10][03][c8]v[0d]
04/20 07:35:13 yS1 CND: ______v[0a]OK[0d]
04/20 07:35:13 yS1 CND: OK ** found **
04/20 07:35:13 yS1 send: AT&K3W0S7=3D60[0d][0d]
04/20 07:35:13 yS1 waiting for ``OK_''
04/20 07:35:13 yS1 got: [0a]AT&F&C1&D0S95=3D3[0d]
04/20 07:35:13 yS1 CND: AT&F&C1&D0S95=3D3[0d]AT&K3W0S7=3D60[0d]
04/20 07:35:13 yS1 CND: AT&K3W0S7=3D60[0d][0d][0a]ERROR
04/20 07:35:13 yS1 found action string: ``ERROR''
04/20 07:35:13 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:13 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1584
04/20 07:35:13 yS1 removing lock file
--
04/20 07:35:13 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:13 yS1 check for lockfiles
04/20 07:35:13 yS1 checklock: stat failed, no file
04/20 07:35:13 yS1 locking the line
04/20 07:35:13 yS1 makelock(ttyS1) called
04/20 07:35:13 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:13 yS1 lock made
04/20 07:35:13 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:13 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:35:13 yS1 tss: set speed to 9600 (015)
04/20 07:35:13 yS1 tio_set_flow_control( HARD )
04/20 07:35:13 yS1 waiting for line to clear (VTIME), read:
04/20 07:35:14 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:17 yS1 waiting for ``OK_''
04/20 07:35:17 yS1 got: +++AT&F&C1&D0S95=3D3[0d]
04/20 07:35:17 yS1 CND: +++AT&F&C1&D0S95=3D3[0d][0d][0a]ERROR
04/20 07:35:17 yS1 found action string: ``ERROR''
04/20 07:35:17 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:17 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1585
04/20 07:35:17 yS1 removing lock file
--
04/20 07:35:17 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:17 yS1 check for lockfiles
04/20 07:35:17 yS1 checklock: stat failed, no file
04/20 07:35:17 yS1 locking the line
04/20 07:35:17 yS1 makelock(ttyS1) called
04/20 07:35:17 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:17 yS1 lock made
04/20 07:35:17 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:17 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:35:17 yS1 tss: set speed to 9600 (015)
04/20 07:35:17 yS1 tio_set_flow_control( HARD )
04/20 07:35:17 yS1 waiting for line to clear (VTIME), read:
04/20 07:35:17 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:21 yS1 waiting for ``OK_''
04/20 07:35:21 yS1 got: +++AT&F&C1&D0S95=3D3[0d]
04/20 07:35:21 yS1 CND: +++AT&F&C1&D0S95=3D3[0d][0d][0a]ERROR
04/20 07:35:21 yS1 found action string: ``ERROR''
04/20 07:35:21 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:21 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1586
04/20 07:35:21 yS1 removing lock file
--
04/20 07:35:21 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:21 yS1 check for lockfiles
04/20 07:35:21 yS1 checklock: stat failed, no file
04/20 07:35:21 yS1 locking the line
04/20 07:35:21 yS1 makelock(ttyS1) called
04/20 07:35:21 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:21 yS1 lock made
04/20 07:35:21 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:21 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:35:21 yS1 tss: set speed to 9600 (015)
04/20 07:35:21 yS1 tio_set_flow_control( HARD )
04/20 07:35:21 yS1 waiting for line to clear (VTIME), read:
04/20 07:35:21 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:24 yS1 waiting for ``OK_''
04/20 07:35:24 yS1 got: +++AT&F&C1&D0S95=3D3[0d]
04/20 07:35:24 yS1 CND: +++AT&F&C1&D0S95=3D3[0d][0d][0a]ERROR
04/20 07:35:25 yS1 found action string: ``ERROR''
04/20 07:35:25 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:25 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1587
04/20 07:35:25 yS1 removing lock file
--
04/20 07:35:25 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:25 yS1 check for lockfiles
04/20 07:35:25 yS1 checklock: stat failed, no file
04/20 07:35:25 yS1 locking the line
04/20 07:35:25 yS1 makelock(ttyS1) called
04/20 07:35:25 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:25 yS1 lock made
04/20 07:35:25 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:25 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:35:25 yS1 tss: set speed to 9600 (015)
04/20 07:35:25 yS1 tio_set_flow_control( HARD )
04/20 07:35:25 yS1 waiting for line to clear (VTIME), read:
04/20 07:35:25 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:28 yS1 waiting for ``OK_''
04/20 07:35:28 yS1 got: +++AT&F&C1&D0S95=3D3[0d]
04/20 07:35:28 yS1 CND: +++AT&F&C1&D0S95=3D3[0d][0d][0a]ERROR
04/20 07:35:29 yS1 found action string: ``ERROR''
04/20 07:35:29 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:29 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1588
04/20 07:35:29 yS1 removing lock file
--
04/20 07:35:29 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:29 yS1 check for lockfiles
04/20 07:35:29 yS1 checklock: stat failed, no file
04/20 07:35:29 yS1 locking the line
04/20 07:35:29 yS1 makelock(ttyS1) called
04/20 07:35:29 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:29 yS1 lock made
04/20 07:35:29 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:29 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:35:29 yS1 tss: set speed to 9600 (015)
04/20 07:35:29 yS1 tio_set_flow_control( HARD )
04/20 07:35:29 yS1 waiting for line to clear (VTIME), read:
04/20 07:35:29 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:32 yS1 waiting for ``OK_''
04/20 07:35:32 yS1 got: +++AT&F&C1&D0S95=3D3[0d]
04/20 07:35:32 yS1 CND: +++AT&F&C1&D0S95=3D3[0d][0d][0a]ERROR
04/20 07:35:32 yS1 found action string: ``ERROR''
04/20 07:35:32 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:32 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1589
04/20 07:35:32 yS1 removing lock file
--
04/20 07:35:32 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:32 yS1 check for lockfiles
04/20 07:35:32 yS1 checklock: stat failed, no file
04/20 07:35:32 yS1 locking the line
04/20 07:35:32 yS1 makelock(ttyS1) called
04/20 07:35:32 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:32 yS1 lock made
04/20 07:35:33 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:33 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:35:33 yS1 tss: set speed to 9600 (015)
04/20 07:35:33 yS1 tio_set_flow_control( HARD )
04/20 07:35:33 yS1 waiting for line to clear (VTIME), read:
04/20 07:35:33 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:36 yS1 waiting for ``OK_''
04/20 07:35:36 yS1 got: [0d][0a]NO CARRIER
04/20 07:35:36 yS1 found action string: ``NO CARRIER''
04/20 07:35:36 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:36 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1590
04/20 07:35:36 yS1 removing lock file
--
04/20 07:35:36 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:36 yS1 check for lockfiles
04/20 07:35:36 yS1 checklock: stat failed, no file
04/20 07:35:36 yS1 locking the line
04/20 07:35:36 yS1 makelock(ttyS1) called
04/20 07:35:36 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:36 yS1 lock made
04/20 07:35:37 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR
04/20 07:35:37 yS1 tss: set speed to 9600 (015)
04/20 07:35:37 yS1 tio_set_flow_control( HARD )
04/20 07:35:37 yS1 waiting for line to clear (VTIME), read:
04/20 07:35:37 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:40 yS1 waiting for ``OK_''
04/20 07:35:40 yS1 got: +++AT&F&C1&D0S95=3D3[0d]
04/20 07:35:40 yS1 CND: +++AT&F&C1&D0S95=3D3[0d][0d][0a]OK[0d]
04/20 07:35:40 yS1 CND: OK ** found **
04/20 07:35:40 yS1 send: AT&K3W0S7=3D60[0d][0d]
04/20 07:35:40 yS1 waiting for ``OK_''
04/20 07:35:40 yS1 got: [0a]AT&K3W0S7=3D60[0d]
04/20 07:35:40 yS1 CND: AT&K3W0S7=3D60[0d][0d][0a]OK[0d]
04/20 07:35:40 yS1 CND: OK ** found **
04/20 07:35:40 yS1 waiting for line to clear (VTIME), read: [0a]
04/20 07:35:41 yS1 removing lock file
04/20 07:35:41 yS1 waiting...
#### Set "AT&D1" to replace "AT&D0" in "init-chat" of configuration file
#### /etc/mgetty+sendfax/mgetty.config : -
04/20 07:49:21 yS1 select returned 1
04/20 07:49:21 yS1 checking lockfiles, locking the line
04/20 07:49:21 yS1 makelock(ttyS1) called
04/20 07:49:21 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:49:21 yS1 lock not made: lock file exists (pid=3D1610)
04/20 07:49:21 yS1 lock file exists (dialout)!
04/20 07:49:21 yS1 lockfile found, pid=3D1610
04/20 07:49:21 yS1 looking for utmp entry... (my PID: 1591)
04/20 07:49:21 yS1 utmp + wtmp entry made
04/20 07:49:21 yS1 lockfile found, pid=3D1610
04/20 07:49:31 yS1 lockfile found, pid=3D1610
04/20 07:49:41 yS1 lockfile found, pid=3D1610
04/20 07:49:51 yS1 checklock: stat failed, no file
04/20 07:49:56 yS1 checklock: stat failed, no file
--
04/20 07:49:56 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:49:56 yS1 check for lockfiles
04/20 07:49:56 yS1 checklock: stat failed, no file
04/20 07:49:56 yS1 locking the line
04/20 07:49:56 yS1 makelock(ttyS1) called
04/20 07:49:56 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:49:56 yS1 lock made
04/20 07:49:57 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR
04/20 07:49:57 yS1 tss: set speed to 9600 (015)
04/20 07:49:57 yS1 tio_set_flow_control( HARD )
04/20 07:49:57 yS1 waiting for line to clear (VTIME), read:
04/20 07:49:57 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:50:00 yS1 waiting for ``OK_''
04/20 07:50:00 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:50:00 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]OK[0d]
04/20 07:50:00 yS1 CND: OK ** found **
04/20 07:50:00 yS1 send: AT&K3W0S7=3D60[0d][0d]
04/20 07:50:00 yS1 waiting for ``OK_''
04/20 07:50:00 yS1 got: [0a]AT&K3W0S7=3D60[0d]
04/20 07:50:00 yS1 CND: AT&K3W0S7=3D60[0d][0d][0a]OK[0d]
04/20 07:50:00 yS1 CND: OK ** found **
04/20 07:50:00 yS1 waiting for line to clear (VTIME), read: [0a]
04/20 07:50:00 yS1 removing lock file
04/20 07:50:00 yS1 waiting...
04/20 07:50:22 yS1 select returned 1
04/20 07:50:22 yS1 checking lockfiles, locking the line
04/20 07:50:22 yS1 makelock(ttyS1) called
04/20 07:50:22 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:50:22 yS1 lock made
04/20 07:50:22 yS1 waiting for ``RING''
04/20 07:50:22 yS1 got: [0d][0a]RING ** found **
04/20 07:50:22 yS1 send: ATA[0d]
04/20 07:50:22 yS1 waiting for ``CONNECT''
04/20 07:50:22 yS1 got: [0d]
04/20 07:50:22 yS1 CND: RING[0a]ATA[0d]
04/20 07:50:22 yS1 CND: ATA[ff][0a]
04/20 07:50:27 yS1 CND: _[0a]
04/20 07:52:02 yS1 timeout in chat script, waiting for `CONNECT'
04/20 07:52:02 ##### failed timeout dev=3DttyS1, pid=3D1612, caller=3D'no=
ne',
conn=3D'', name=3D''
04/20 07:52:02 yS1 removing lock file
--
04/20 07:52:02 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:52:02 yS1 check for lockfiles
04/20 07:52:02 yS1 checklock: stat failed, no file
04/20 07:52:02 yS1 locking the line
04/20 07:52:02 yS1 makelock(ttyS1) called
04/20 07:52:02 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:52:02 yS1 lock made
04/20 07:52:02 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR
04/20 07:52:02 yS1 tss: set speed to 9600 (015)
04/20 07:52:02 yS1 tio_set_flow_control( HARD )
04/20 07:52:02 yS1 waiting for line to clear (VTIME), read:
04/20 07:52:02 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:52:05 yS1 waiting for ``OK_''
04/20 07:52:05 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:52:06 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]OK[0d]
04/20 07:52:06 yS1 CND: OK ** found **
04/20 07:52:06 yS1 send: AT&K3W0S7=3D60[0d][0d]
04/20 07:52:06 yS1 waiting for ``OK_''
04/20 07:52:06 yS1 got: [0a]AT&K3W0S7=3D60[0d]
04/20 07:52:06 yS1 CND: AT&K3W0S7=3D60[0d][0d][0a]OK[0d]
04/20 07:52:06 yS1 CND: OK ** found **
04/20 07:52:06 yS1 waiting for line to clear (VTIME), read: [0a]
04/20 07:52:06 yS1 removing lock file
04/20 07:52:06 yS1 waiting...
04/20 07:54:55 yS1 select returned 1
04/20 07:54:55 yS1 checking lockfiles, locking the line
04/20 07:54:55 yS1 makelock(ttyS1) called
04/20 07:54:55 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:54:55 yS1 lock made
04/20 07:54:55 yS1 waiting for ``RING''
04/20 07:54:55 yS1 got: [0d][0a]RING ** found **
04/20 07:54:55 yS1 send: ATA[0d]
04/20 07:54:55 yS1 waiting for ``CONNECT''
04/20 07:54:55 yS1 got: [0d]
04/20 07:54:55 yS1 CND: RING[0a]ATA[0d]
04/20 07:54:55 yS1 CND: ATA[ff][0a]
04/20 07:55:02 yS1 CND: _[0a][0a][0a][0a][0a]
04/20 07:56:35 yS1 timeout in chat script, waiting for `CONNECT'
04/20 07:56:35 ##### failed timeout dev=3DttyS1, pid=3D1613, caller=3D'no=
ne',
conn=3D'', name=3D''
04/20 07:56:35 yS1 removing lock file
--
04/20 07:56:35 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:56:35 yS1 check for lockfiles
04/20 07:56:35 yS1 checklock: stat failed, no file
04/20 07:56:35 yS1 locking the line
04/20 07:56:35 yS1 makelock(ttyS1) called
04/20 07:56:35 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:56:35 yS1 lock made
04/20 07:56:36 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR
04/20 07:56:36 yS1 tss: set speed to 9600 (015)
04/20 07:56:36 yS1 tio_set_flow_control( HARD )
04/20 07:56:36 yS1 waiting for line to clear (VTIME), read:
04/20 07:56:36 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:56:39 yS1 waiting for ``OK_''
04/20 07:56:39 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:56:39 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]OK[0d]
04/20 07:56:39 yS1 CND: OK ** found **
04/20 07:56:39 yS1 send: AT&K3W0S7=3D60[0d][0d]
04/20 07:56:39 yS1 waiting for ``OK_''
04/20 07:56:39 yS1 got: [0a]AT&K3W0S7=3D60[0d]
04/20 07:56:39 yS1 CND: AT&K3W0S7=3D60[0d][0d][0a]OK[0d]
04/20 07:56:40 yS1 CND: OK ** found **
04/20 07:56:40 yS1 waiting for line to clear (VTIME), read: [0a]
04/20 07:56:40 yS1 removing lock file
04/20 07:56:40 yS1 waiting...
04/20 07:56:40 yS1 select returned 1
04/20 07:56:40 yS1 checking lockfiles, locking the line
04/20 07:56:40 yS1 makelock(ttyS1) called
04/20 07:56:40 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:56:40 yS1 lock made
04/20 07:56:40 yS1 waiting for ``RING''
04/20 07:56:40 yS1 got: [0d][0a]RING ** found **
04/20 07:56:40 yS1 send: ATA[0d]
04/20 07:56:40 yS1 waiting for ``CONNECT''
04/20 07:56:40 yS1 got: [0d]
04/20 07:56:40 yS1 CND: RING[0a]ATA[0d]
04/20 07:56:40 yS1 CND: ATA[0d][0a]CONNECT ** found **
04/20 07:56:54 yS1 send:
04/20 07:56:54 yS1 waiting for line to clear (VTIME), read:
14400[0d][0a][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]=
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][=
91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][9=
1][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91=
][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91]=
[11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][=
11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][1=
1][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11=
][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]=
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][=
91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][9=
1][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91=
][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91]=
[11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][=
11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][1=
1][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11=
][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]=
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][=
91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][9=
1][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91=
][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91]=
[11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][=
11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][1=
1][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11=
][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]=
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][=
91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][9=
1][11]
04/20 07:56:55 yS1 clean_line: only 500 of 934 bytes logged
04/20 07:56:55 yS1 warning: carrier signal is ignored
04/20 07:56:55 yS1 looking for utmp entry... (my PID: 1614)
04/20 07:56:55 yS1 utmp + wtmp entry made
04/20 07:56:56 yS1 tio_set_flow_control( HARD )
04/20 07:56:56 yS1 print welcome banner (/etc/issue.net)
04/20 07:56:56 yS1 getlogname (AUTO_PPP),
read:[16][10][02]"[01][02][01][06][01][00][00][00][00][ff][02][01][03]
04/20 07:56:56 yS1 getlogname (AUTO_PPP), read:[03]
04/20 07:56:56 yS1 getlogname (AUTO_PPP), read:[01][08][04]
--
04/20 07:56:57 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:56:57 yS1 check for lockfiles
04/20 07:56:57 yS1 checklock: no active process has lock, will remove
04/20 07:56:57 yS1 locking the line
04/20 07:56:57 yS1 makelock(ttyS1) called
04/20 07:56:57 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:56:57 yS1 lock made
04/20 07:56:58 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:56:58 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:56:58 yS1 tss: set speed to 9600 (015)
04/20 07:56:58 yS1 tio_set_flow_control( HARD )
04/20 07:56:58 yS1 waiting for line to clear (VTIME), read:
04/20 07:56:58 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:01 yS1 waiting for ``OK_''
04/20 07:57:01 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:01 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:01 yS1 found action string: ``ERROR''
04/20 07:57:01 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:01 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1615
04/20 07:57:01 yS1 removing lock file
--
04/20 07:57:01 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:01 yS1 check for lockfiles
04/20 07:57:01 yS1 checklock: stat failed, no file
04/20 07:57:01 yS1 locking the line
04/20 07:57:01 yS1 makelock(ttyS1) called
04/20 07:57:01 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:01 yS1 lock made
04/20 07:57:02 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:02 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:57:02 yS1 tss: set speed to 9600 (015)
04/20 07:57:02 yS1 tio_set_flow_control( HARD )
04/20 07:57:02 yS1 waiting for line to clear (VTIME), read:
04/20 07:57:02 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:05 yS1 waiting for ``OK_''
04/20 07:57:05 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:05 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:05 yS1 found action string: ``ERROR''
04/20 07:57:05 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:05 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1616
04/20 07:57:05 yS1 removing lock file
--
04/20 07:57:05 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:05 yS1 check for lockfiles
04/20 07:57:05 yS1 checklock: stat failed, no file
04/20 07:57:05 yS1 locking the line
04/20 07:57:05 yS1 makelock(ttyS1) called
04/20 07:57:05 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:05 yS1 lock made
04/20 07:57:06 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:06 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:57:06 yS1 tss: set speed to 9600 (015)
04/20 07:57:06 yS1 tio_set_flow_control( HARD )
04/20 07:57:06 yS1 waiting for line to clear (VTIME), read:
04/20 07:57:06 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:09 yS1 waiting for ``OK_''
04/20 07:57:09 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:09 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:09 yS1 found action string: ``ERROR''
04/20 07:57:09 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:09 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1617
04/20 07:57:09 yS1 removing lock file
--
04/20 07:57:09 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:09 yS1 check for lockfiles
04/20 07:57:09 yS1 checklock: stat failed, no file
04/20 07:57:09 yS1 locking the line
04/20 07:57:09 yS1 makelock(ttyS1) called
04/20 07:57:09 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:09 yS1 lock made
04/20 07:57:10 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:10 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:57:10 yS1 tss: set speed to 9600 (015)
04/20 07:57:10 yS1 tio_set_flow_control( HARD )
04/20 07:57:10 yS1 waiting for line to clear (VTIME), read:
04/20 07:57:10 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:13 yS1 waiting for ``OK_''
04/20 07:57:13 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:13 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:13 yS1 found action string: ``ERROR''
04/20 07:57:13 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:13 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1618
04/20 07:57:13 yS1 removing lock file
--
04/20 07:57:13 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:13 yS1 check for lockfiles
04/20 07:57:13 yS1 checklock: stat failed, no file
04/20 07:57:13 yS1 locking the line
04/20 07:57:13 yS1 makelock(ttyS1) called
04/20 07:57:13 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:13 yS1 lock made
04/20 07:57:13 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:13 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:57:13 yS1 tss: set speed to 9600 (015)
04/20 07:57:13 yS1 tio_set_flow_control( HARD )
04/20 07:57:13 yS1 waiting for line to clear (VTIME), read:
04/20 07:57:14 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:17 yS1 waiting for ``OK_''
04/20 07:57:17 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:17 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:17 yS1 found action string: ``ERROR''
04/20 07:57:17 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:17 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1619
04/20 07:57:17 yS1 removing lock file
--
04/20 07:57:17 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:17 yS1 check for lockfiles
04/20 07:57:17 yS1 checklock: stat failed, no file
04/20 07:57:17 yS1 locking the line
04/20 07:57:17 yS1 makelock(ttyS1) called
04/20 07:57:17 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:17 yS1 lock made
04/20 07:57:17 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:17 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:57:17 yS1 tss: set speed to 9600 (015)
04/20 07:57:17 yS1 tio_set_flow_control( HARD )
04/20 07:57:17 yS1 waiting for line to clear (VTIME), read:
04/20 07:57:18 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:21 yS1 waiting for ``OK_''
04/20 07:57:21 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:21 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:21 yS1 found action string: ``ERROR''
04/20 07:57:21 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:21 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1620
04/20 07:57:21 yS1 removing lock file
--
04/20 07:57:21 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:21 yS1 check for lockfiles
04/20 07:57:21 yS1 checklock: stat failed, no file
04/20 07:57:21 yS1 locking the line
04/20 07:57:21 yS1 makelock(ttyS1) called
04/20 07:57:21 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:21 yS1 lock made
04/20 07:57:21 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:21 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:57:21 yS1 tss: set speed to 9600 (015)
04/20 07:57:21 yS1 tio_set_flow_control( HARD )
04/20 07:57:21 yS1 waiting for line to clear (VTIME), read:
04/20 07:57:21 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:25 yS1 waiting for ``OK_''
04/20 07:57:25 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:25 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:25 yS1 found action string: ``ERROR''
04/20 07:57:25 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:25 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1621
04/20 07:57:25 yS1 removing lock file
--
04/20 07:57:25 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:25 yS1 check for lockfiles
04/20 07:57:25 yS1 checklock: stat failed, no file
04/20 07:57:25 yS1 locking the line
04/20 07:57:25 yS1 makelock(ttyS1) called
04/20 07:57:25 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:25 yS1 lock made
04/20 07:57:25 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:25 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:57:25 yS1 tss: set speed to 9600 (015)
04/20 07:57:25 yS1 tio_set_flow_control( HARD )
04/20 07:57:25 yS1 waiting for line to clear (VTIME), read:
04/20 07:57:25 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:28 yS1 waiting for ``OK_''
04/20 07:57:28 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:28 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:29 yS1 found action string: ``ERROR''
04/20 07:57:29 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:29 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1622
04/20 07:57:29 yS1 removing lock file
--
04/20 07:57:29 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:29 yS1 check for lockfiles
04/20 07:57:29 yS1 checklock: stat failed, no file
04/20 07:57:29 yS1 locking the line
04/20 07:57:29 yS1 makelock(ttyS1) called
04/20 07:57:29 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:29 yS1 lock made
04/20 07:57:29 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:29 yS1 WARNING: DCD line still active, check modem settings
(AT&Dx)
04/20 07:57:29 yS1 tss: set speed to 9600 (015)
04/20 07:57:29 yS1 tio_set_flow_control( HARD )
04/20 07:57:29 yS1 waiting for line to clear (VTIME), read:
04/20 07:57:29 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:32 yS1 waiting for ``OK_''
04/20 07:57:32 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:32 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:33 yS1 found action string: ``ERROR''
04/20 07:57:33 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:33 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1623
04/20 07:57:33 yS1 removing lock file
--
04/20 08:02:34 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 08:02:34 yS1 check for lockfiles
04/20 08:02:34 yS1 checklock: stat failed, no file
04/20 08:02:34 yS1 locking the line
04/20 08:02:34 yS1 makelock(ttyS1) called
04/20 08:02:34 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 08:02:34 yS1 lock made
04/20 08:02:34 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR
04/20 08:02:34 yS1 tss: set speed to 9600 (015)
04/20 08:02:34 yS1 tio_set_flow_control( HARD )
04/20 08:02:34 yS1 waiting for line to clear (VTIME), read:
04/20 08:02:34 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 08:02:37 yS1 waiting for ``OK_''
04/20 08:02:37 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 08:02:37 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]OK[0d]
04/20 08:02:38 yS1 CND: OK ** found **
04/20 08:02:38 yS1 send: AT&K3W0S7=3D60[0d][0d]
04/20 08:02:38 yS1 waiting for ``OK_''
04/20 08:02:38 yS1 got: [0a]AT&K3W0S7=3D60[0d]
04/20 08:02:38 yS1 CND: AT&K3W0S7=3D60[0d][0d][0a]OK[0d]
04/20 08:02:38 yS1 CND: OK ** found **
04/20 08:02:38 yS1 waiting for line to clear (VTIME), read: [0a]
04/20 08:02:38 yS1 removing lock file
04/20 08:02:38 yS1 waiting...
04/20 09:02:38 yS1 select returned 0
04/20 09:02:38 yS1 checking if modem is still alive
04/20 09:02:38 yS1 makelock(ttyS1) called
04/20 09:02:38 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 09:02:38 yS1 lock made
04/20 09:02:38 yS1 mdm_send: 'AT'
04/20 09:02:38 yS1 got:AT[0d]
04/20 09:02:38 yS1 mdm_command: string 'AT'
04/20 09:02:38 yS1 got:[0d][0a]OK[0d]
04/20 09:02:38 yS1 mdm_command: string 'OK' -> OK
04/20 09:02:38 yS1 waiting for line to clear (VTIME), read:
04/20 09:02:39 yS1 removing lock file
04/20 09:02:39 yS1 waiting...
--------------89A9E1DE8BEABECD1304ED49
Content-Type: text/plain; charset=iso-8859-1;
name="log_mg.ttyS1.mgetty"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline;
filename="log_mg.ttyS1.mgetty"
### Started on Apl.19, 1999 after 17:15hrs
### Debug level 9
--
04/20 07:35:09 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:09 yS1 check for lockfiles
04/20 07:35:09 yS1 checklock: no active process has lock, will remove
04/20 07:35:09 yS1 locking the line
04/20 07:35:09 yS1 makelock(ttyS1) called
04/20 07:35:09 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:09 yS1 lock made
04/20 07:35:09 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:09 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:35:09 yS1 tss: set speed to 9600 (015)
04/20 07:35:09 yS1 tio_set_flow_control( HARD )
04/20 07:35:09 yS1 waiting for line to clear (VTIME), read: [16][10][02=
]"[01][02][01][06][01][00][00][00][00][ff][02][01][03][03][01][08][04][02=
]@[00][08][01][93][09][01][1d][0c][02][03]=3D[0d][02][ff][ff][10][03][c8]=
v
04/20 07:35:10 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:13 yS1 waiting for ``OK_''
04/20 07:35:13 yS1 got: [16][10][02]"[01][02][01][06][01][00][00][00][0=
0][ff][02][01][03][03][01][08][04][02]@[00][08][01][93][09][01][1d][0c][0=
2][03]=3D[0d]
04/20 07:35:13 yS1 CND: ___"_____[02][ff][ff][10][03][c8]v[16][10][02]=
"[01][02][01][06][01][00][00][00][00][ff][02][01][03][03][01][08][04][02]=
@[00][08][01][93][09][01][1d][0c][02][03]=3D[0d]
04/20 07:35:13 yS1 CND: ______v___"_____[02][ff][ff][10][03][c8]v[0d]
04/20 07:35:13 yS1 CND: ______v[0a]OK[0d]
04/20 07:35:13 yS1 CND: OK ** found **
04/20 07:35:13 yS1 send: AT&K3W0S7=3D60[0d][0d]
04/20 07:35:13 yS1 waiting for ``OK_''
04/20 07:35:13 yS1 got: [0a]AT&F&C1&D0S95=3D3[0d]
04/20 07:35:13 yS1 CND: AT&F&C1&D0S95=3D3[0d]AT&K3W0S7=3D60[0d]
04/20 07:35:13 yS1 CND: AT&K3W0S7=3D60[0d][0d][0a]ERROR
04/20 07:35:13 yS1 found action string: ``ERROR''
04/20 07:35:13 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:13 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1584
04/20 07:35:13 yS1 removing lock file
--
04/20 07:35:13 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:13 yS1 check for lockfiles
04/20 07:35:13 yS1 checklock: stat failed, no file
04/20 07:35:13 yS1 locking the line
04/20 07:35:13 yS1 makelock(ttyS1) called
04/20 07:35:13 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:13 yS1 lock made
04/20 07:35:13 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:13 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:35:13 yS1 tss: set speed to 9600 (015)
04/20 07:35:13 yS1 tio_set_flow_control( HARD )
04/20 07:35:13 yS1 waiting for line to clear (VTIME), read: =
04/20 07:35:14 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:17 yS1 waiting for ``OK_''
04/20 07:35:17 yS1 got: +++AT&F&C1&D0S95=3D3[0d]
04/20 07:35:17 yS1 CND: +++AT&F&C1&D0S95=3D3[0d][0d][0a]ERROR
04/20 07:35:17 yS1 found action string: ``ERROR''
04/20 07:35:17 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:17 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1585
04/20 07:35:17 yS1 removing lock file
--
04/20 07:35:17 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:17 yS1 check for lockfiles
04/20 07:35:17 yS1 checklock: stat failed, no file
04/20 07:35:17 yS1 locking the line
04/20 07:35:17 yS1 makelock(ttyS1) called
04/20 07:35:17 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:17 yS1 lock made
04/20 07:35:17 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:17 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:35:17 yS1 tss: set speed to 9600 (015)
04/20 07:35:17 yS1 tio_set_flow_control( HARD )
04/20 07:35:17 yS1 waiting for line to clear (VTIME), read: =
04/20 07:35:17 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:21 yS1 waiting for ``OK_''
04/20 07:35:21 yS1 got: +++AT&F&C1&D0S95=3D3[0d]
04/20 07:35:21 yS1 CND: +++AT&F&C1&D0S95=3D3[0d][0d][0a]ERROR
04/20 07:35:21 yS1 found action string: ``ERROR''
04/20 07:35:21 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:21 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1586
04/20 07:35:21 yS1 removing lock file
--
04/20 07:35:21 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:21 yS1 check for lockfiles
04/20 07:35:21 yS1 checklock: stat failed, no file
04/20 07:35:21 yS1 locking the line
04/20 07:35:21 yS1 makelock(ttyS1) called
04/20 07:35:21 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:21 yS1 lock made
04/20 07:35:21 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:21 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:35:21 yS1 tss: set speed to 9600 (015)
04/20 07:35:21 yS1 tio_set_flow_control( HARD )
04/20 07:35:21 yS1 waiting for line to clear (VTIME), read: =
04/20 07:35:21 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:24 yS1 waiting for ``OK_''
04/20 07:35:24 yS1 got: +++AT&F&C1&D0S95=3D3[0d]
04/20 07:35:24 yS1 CND: +++AT&F&C1&D0S95=3D3[0d][0d][0a]ERROR
04/20 07:35:25 yS1 found action string: ``ERROR''
04/20 07:35:25 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:25 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1587
04/20 07:35:25 yS1 removing lock file
--
04/20 07:35:25 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:25 yS1 check for lockfiles
04/20 07:35:25 yS1 checklock: stat failed, no file
04/20 07:35:25 yS1 locking the line
04/20 07:35:25 yS1 makelock(ttyS1) called
04/20 07:35:25 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:25 yS1 lock made
04/20 07:35:25 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:25 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:35:25 yS1 tss: set speed to 9600 (015)
04/20 07:35:25 yS1 tio_set_flow_control( HARD )
04/20 07:35:25 yS1 waiting for line to clear (VTIME), read: =
04/20 07:35:25 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:28 yS1 waiting for ``OK_''
04/20 07:35:28 yS1 got: +++AT&F&C1&D0S95=3D3[0d]
04/20 07:35:28 yS1 CND: +++AT&F&C1&D0S95=3D3[0d][0d][0a]ERROR
04/20 07:35:29 yS1 found action string: ``ERROR''
04/20 07:35:29 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:29 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1588
04/20 07:35:29 yS1 removing lock file
--
04/20 07:35:29 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:29 yS1 check for lockfiles
04/20 07:35:29 yS1 checklock: stat failed, no file
04/20 07:35:29 yS1 locking the line
04/20 07:35:29 yS1 makelock(ttyS1) called
04/20 07:35:29 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:29 yS1 lock made
04/20 07:35:29 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:29 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:35:29 yS1 tss: set speed to 9600 (015)
04/20 07:35:29 yS1 tio_set_flow_control( HARD )
04/20 07:35:29 yS1 waiting for line to clear (VTIME), read: =
04/20 07:35:29 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:32 yS1 waiting for ``OK_''
04/20 07:35:32 yS1 got: +++AT&F&C1&D0S95=3D3[0d]
04/20 07:35:32 yS1 CND: +++AT&F&C1&D0S95=3D3[0d][0d][0a]ERROR
04/20 07:35:32 yS1 found action string: ``ERROR''
04/20 07:35:32 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:32 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1589
04/20 07:35:32 yS1 removing lock file
--
04/20 07:35:32 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:32 yS1 check for lockfiles
04/20 07:35:32 yS1 checklock: stat failed, no file
04/20 07:35:32 yS1 locking the line
04/20 07:35:32 yS1 makelock(ttyS1) called
04/20 07:35:32 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:32 yS1 lock made
04/20 07:35:33 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:35:33 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:35:33 yS1 tss: set speed to 9600 (015)
04/20 07:35:33 yS1 tio_set_flow_control( HARD )
04/20 07:35:33 yS1 waiting for line to clear (VTIME), read: =
04/20 07:35:33 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:36 yS1 waiting for ``OK_''
04/20 07:35:36 yS1 got: [0d][0a]NO CARRIER
04/20 07:35:36 yS1 found action string: ``NO CARRIER''
04/20 07:35:36 yS1 init chat failed, exiting...: Invalid argument
04/20 07:35:36 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1590
04/20 07:35:36 yS1 removing lock file
--
04/20 07:35:36 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:35:36 yS1 check for lockfiles
04/20 07:35:36 yS1 checklock: stat failed, no file
04/20 07:35:36 yS1 locking the line
04/20 07:35:36 yS1 makelock(ttyS1) called
04/20 07:35:36 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:35:36 yS1 lock made
04/20 07:35:37 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR
04/20 07:35:37 yS1 tss: set speed to 9600 (015)
04/20 07:35:37 yS1 tio_set_flow_control( HARD )
04/20 07:35:37 yS1 waiting for line to clear (VTIME), read: =
04/20 07:35:37 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D0S95=3D3[0d][0d]
04/20 07:35:40 yS1 waiting for ``OK_''
04/20 07:35:40 yS1 got: +++AT&F&C1&D0S95=3D3[0d]
04/20 07:35:40 yS1 CND: +++AT&F&C1&D0S95=3D3[0d][0d][0a]OK[0d]
04/20 07:35:40 yS1 CND: OK ** found **
04/20 07:35:40 yS1 send: AT&K3W0S7=3D60[0d][0d]
04/20 07:35:40 yS1 waiting for ``OK_''
04/20 07:35:40 yS1 got: [0a]AT&K3W0S7=3D60[0d]
04/20 07:35:40 yS1 CND: AT&K3W0S7=3D60[0d][0d][0a]OK[0d]
04/20 07:35:40 yS1 CND: OK ** found **
04/20 07:35:40 yS1 waiting for line to clear (VTIME), read: [0a]
04/20 07:35:41 yS1 removing lock file
04/20 07:35:41 yS1 waiting...
#### Set "AT&D1" to replace "AT&D0" in "init-chat" of configuration file
#### /etc/mgetty+sendfax/mgetty.config : -
04/20 07:49:21 yS1 select returned 1
04/20 07:49:21 yS1 checking lockfiles, locking the line
04/20 07:49:21 yS1 makelock(ttyS1) called
04/20 07:49:21 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:49:21 yS1 lock not made: lock file exists (pid=3D1610)
04/20 07:49:21 yS1 lock file exists (dialout)!
04/20 07:49:21 yS1 lockfile found, pid=3D1610
04/20 07:49:21 yS1 looking for utmp entry... (my PID: 1591)
04/20 07:49:21 yS1 utmp + wtmp entry made
04/20 07:49:21 yS1 lockfile found, pid=3D1610
04/20 07:49:31 yS1 lockfile found, pid=3D1610
04/20 07:49:41 yS1 lockfile found, pid=3D1610
04/20 07:49:51 yS1 checklock: stat failed, no file
04/20 07:49:56 yS1 checklock: stat failed, no file
--
04/20 07:49:56 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:49:56 yS1 check for lockfiles
04/20 07:49:56 yS1 checklock: stat failed, no file
04/20 07:49:56 yS1 locking the line
04/20 07:49:56 yS1 makelock(ttyS1) called
04/20 07:49:56 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:49:56 yS1 lock made
04/20 07:49:57 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR
04/20 07:49:57 yS1 tss: set speed to 9600 (015)
04/20 07:49:57 yS1 tio_set_flow_control( HARD )
04/20 07:49:57 yS1 waiting for line to clear (VTIME), read: =
04/20 07:49:57 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:50:00 yS1 waiting for ``OK_''
04/20 07:50:00 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:50:00 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]OK[0d]
04/20 07:50:00 yS1 CND: OK ** found **
04/20 07:50:00 yS1 send: AT&K3W0S7=3D60[0d][0d]
04/20 07:50:00 yS1 waiting for ``OK_''
04/20 07:50:00 yS1 got: [0a]AT&K3W0S7=3D60[0d]
04/20 07:50:00 yS1 CND: AT&K3W0S7=3D60[0d][0d][0a]OK[0d]
04/20 07:50:00 yS1 CND: OK ** found **
04/20 07:50:00 yS1 waiting for line to clear (VTIME), read: [0a]
04/20 07:50:00 yS1 removing lock file
04/20 07:50:00 yS1 waiting...
04/20 07:50:22 yS1 select returned 1
04/20 07:50:22 yS1 checking lockfiles, locking the line
04/20 07:50:22 yS1 makelock(ttyS1) called
04/20 07:50:22 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:50:22 yS1 lock made
04/20 07:50:22 yS1 waiting for ``RING''
04/20 07:50:22 yS1 got: [0d][0a]RING ** found **
04/20 07:50:22 yS1 send: ATA[0d]
04/20 07:50:22 yS1 waiting for ``CONNECT''
04/20 07:50:22 yS1 got: [0d]
04/20 07:50:22 yS1 CND: RING[0a]ATA[0d]
04/20 07:50:22 yS1 CND: ATA[ff][0a]
04/20 07:50:27 yS1 CND: _[0a]
04/20 07:52:02 yS1 timeout in chat script, waiting for `CONNECT'
04/20 07:52:02 ##### failed timeout dev=3DttyS1, pid=3D1612, caller=3D'no=
ne', conn=3D'', name=3D''
04/20 07:52:02 yS1 removing lock file
--
04/20 07:52:02 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:52:02 yS1 check for lockfiles
04/20 07:52:02 yS1 checklock: stat failed, no file
04/20 07:52:02 yS1 locking the line
04/20 07:52:02 yS1 makelock(ttyS1) called
04/20 07:52:02 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:52:02 yS1 lock made
04/20 07:52:02 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR
04/20 07:52:02 yS1 tss: set speed to 9600 (015)
04/20 07:52:02 yS1 tio_set_flow_control( HARD )
04/20 07:52:02 yS1 waiting for line to clear (VTIME), read: =
04/20 07:52:02 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:52:05 yS1 waiting for ``OK_''
04/20 07:52:05 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:52:06 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]OK[0d]
04/20 07:52:06 yS1 CND: OK ** found **
04/20 07:52:06 yS1 send: AT&K3W0S7=3D60[0d][0d]
04/20 07:52:06 yS1 waiting for ``OK_''
04/20 07:52:06 yS1 got: [0a]AT&K3W0S7=3D60[0d]
04/20 07:52:06 yS1 CND: AT&K3W0S7=3D60[0d][0d][0a]OK[0d]
04/20 07:52:06 yS1 CND: OK ** found **
04/20 07:52:06 yS1 waiting for line to clear (VTIME), read: [0a]
04/20 07:52:06 yS1 removing lock file
04/20 07:52:06 yS1 waiting...
04/20 07:54:55 yS1 select returned 1
04/20 07:54:55 yS1 checking lockfiles, locking the line
04/20 07:54:55 yS1 makelock(ttyS1) called
04/20 07:54:55 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:54:55 yS1 lock made
04/20 07:54:55 yS1 waiting for ``RING''
04/20 07:54:55 yS1 got: [0d][0a]RING ** found **
04/20 07:54:55 yS1 send: ATA[0d]
04/20 07:54:55 yS1 waiting for ``CONNECT''
04/20 07:54:55 yS1 got: [0d]
04/20 07:54:55 yS1 CND: RING[0a]ATA[0d]
04/20 07:54:55 yS1 CND: ATA[ff][0a]
04/20 07:55:02 yS1 CND: _[0a][0a][0a][0a][0a]
04/20 07:56:35 yS1 timeout in chat script, waiting for `CONNECT'
04/20 07:56:35 ##### failed timeout dev=3DttyS1, pid=3D1613, caller=3D'no=
ne', conn=3D'', name=3D''
04/20 07:56:35 yS1 removing lock file
--
04/20 07:56:35 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:56:35 yS1 check for lockfiles
04/20 07:56:35 yS1 checklock: stat failed, no file
04/20 07:56:35 yS1 locking the line
04/20 07:56:35 yS1 makelock(ttyS1) called
04/20 07:56:35 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:56:35 yS1 lock made
04/20 07:56:36 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR
04/20 07:56:36 yS1 tss: set speed to 9600 (015)
04/20 07:56:36 yS1 tio_set_flow_control( HARD )
04/20 07:56:36 yS1 waiting for line to clear (VTIME), read: =
04/20 07:56:36 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:56:39 yS1 waiting for ``OK_''
04/20 07:56:39 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:56:39 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]OK[0d]
04/20 07:56:39 yS1 CND: OK ** found **
04/20 07:56:39 yS1 send: AT&K3W0S7=3D60[0d][0d]
04/20 07:56:39 yS1 waiting for ``OK_''
04/20 07:56:39 yS1 got: [0a]AT&K3W0S7=3D60[0d]
04/20 07:56:39 yS1 CND: AT&K3W0S7=3D60[0d][0d][0a]OK[0d]
04/20 07:56:40 yS1 CND: OK ** found **
04/20 07:56:40 yS1 waiting for line to clear (VTIME), read: [0a]
04/20 07:56:40 yS1 removing lock file
04/20 07:56:40 yS1 waiting...
04/20 07:56:40 yS1 select returned 1
04/20 07:56:40 yS1 checking lockfiles, locking the line
04/20 07:56:40 yS1 makelock(ttyS1) called
04/20 07:56:40 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:56:40 yS1 lock made
04/20 07:56:40 yS1 waiting for ``RING''
04/20 07:56:40 yS1 got: [0d][0a]RING ** found **
04/20 07:56:40 yS1 send: ATA[0d]
04/20 07:56:40 yS1 waiting for ``CONNECT''
04/20 07:56:40 yS1 got: [0d]
04/20 07:56:40 yS1 CND: RING[0a]ATA[0d]
04/20 07:56:40 yS1 CND: ATA[0d][0a]CONNECT ** found **
04/20 07:56:54 yS1 send: =
04/20 07:56:54 yS1 waiting for line to clear (VTIME), read: 14400[0d][=
0a][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][9=
1][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91=
][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91]=
[11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][=
11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][1=
1][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11=
][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]=
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][=
91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][9=
1][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91=
][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91]=
[11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][=
11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][1=
1][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11=
][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]=
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][=
91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][9=
1][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91=
][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91]=
[11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][=
11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][1=
1][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11=
][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]=
[91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][=
91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][9=
1][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91=
][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11][91][11]
04/20 07:56:55 yS1 clean_line: only 500 of 934 bytes logged
04/20 07:56:55 yS1 warning: carrier signal is ignored
04/20 07:56:55 yS1 looking for utmp entry... (my PID: 1614)
04/20 07:56:55 yS1 utmp + wtmp entry made
04/20 07:56:56 yS1 tio_set_flow_control( HARD )
04/20 07:56:56 yS1 print welcome banner (/etc/issue.net)
04/20 07:56:56 yS1 getlogname (AUTO_PPP), read:[16][10][02]"[01][02][01=
][06][01][00][00][00][00][ff][02][01][03]
04/20 07:56:56 yS1 getlogname (AUTO_PPP), read:[03]
04/20 07:56:56 yS1 getlogname (AUTO_PPP), read:[01][08][04]
--
04/20 07:56:57 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:56:57 yS1 check for lockfiles
04/20 07:56:57 yS1 checklock: no active process has lock, will remove
04/20 07:56:57 yS1 locking the line
04/20 07:56:57 yS1 makelock(ttyS1) called
04/20 07:56:57 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:56:57 yS1 lock made
04/20 07:56:58 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:56:58 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:56:58 yS1 tss: set speed to 9600 (015)
04/20 07:56:58 yS1 tio_set_flow_control( HARD )
04/20 07:56:58 yS1 waiting for line to clear (VTIME), read: =
04/20 07:56:58 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:01 yS1 waiting for ``OK_''
04/20 07:57:01 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:01 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:01 yS1 found action string: ``ERROR''
04/20 07:57:01 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:01 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1615
04/20 07:57:01 yS1 removing lock file
--
04/20 07:57:01 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:01 yS1 check for lockfiles
04/20 07:57:01 yS1 checklock: stat failed, no file
04/20 07:57:01 yS1 locking the line
04/20 07:57:01 yS1 makelock(ttyS1) called
04/20 07:57:01 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:01 yS1 lock made
04/20 07:57:02 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:02 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:57:02 yS1 tss: set speed to 9600 (015)
04/20 07:57:02 yS1 tio_set_flow_control( HARD )
04/20 07:57:02 yS1 waiting for line to clear (VTIME), read: =
04/20 07:57:02 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:05 yS1 waiting for ``OK_''
04/20 07:57:05 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:05 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:05 yS1 found action string: ``ERROR''
04/20 07:57:05 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:05 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1616
04/20 07:57:05 yS1 removing lock file
--
04/20 07:57:05 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:05 yS1 check for lockfiles
04/20 07:57:05 yS1 checklock: stat failed, no file
04/20 07:57:05 yS1 locking the line
04/20 07:57:05 yS1 makelock(ttyS1) called
04/20 07:57:05 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:05 yS1 lock made
04/20 07:57:06 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:06 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:57:06 yS1 tss: set speed to 9600 (015)
04/20 07:57:06 yS1 tio_set_flow_control( HARD )
04/20 07:57:06 yS1 waiting for line to clear (VTIME), read: =
04/20 07:57:06 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:09 yS1 waiting for ``OK_''
04/20 07:57:09 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:09 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:09 yS1 found action string: ``ERROR''
04/20 07:57:09 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:09 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1617
04/20 07:57:09 yS1 removing lock file
--
04/20 07:57:09 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:09 yS1 check for lockfiles
04/20 07:57:09 yS1 checklock: stat failed, no file
04/20 07:57:09 yS1 locking the line
04/20 07:57:09 yS1 makelock(ttyS1) called
04/20 07:57:09 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:09 yS1 lock made
04/20 07:57:10 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:10 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:57:10 yS1 tss: set speed to 9600 (015)
04/20 07:57:10 yS1 tio_set_flow_control( HARD )
04/20 07:57:10 yS1 waiting for line to clear (VTIME), read: =
04/20 07:57:10 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:13 yS1 waiting for ``OK_''
04/20 07:57:13 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:13 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:13 yS1 found action string: ``ERROR''
04/20 07:57:13 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:13 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1618
04/20 07:57:13 yS1 removing lock file
--
04/20 07:57:13 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:13 yS1 check for lockfiles
04/20 07:57:13 yS1 checklock: stat failed, no file
04/20 07:57:13 yS1 locking the line
04/20 07:57:13 yS1 makelock(ttyS1) called
04/20 07:57:13 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:13 yS1 lock made
04/20 07:57:13 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:13 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:57:13 yS1 tss: set speed to 9600 (015)
04/20 07:57:13 yS1 tio_set_flow_control( HARD )
04/20 07:57:13 yS1 waiting for line to clear (VTIME), read: =
04/20 07:57:14 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:17 yS1 waiting for ``OK_''
04/20 07:57:17 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:17 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:17 yS1 found action string: ``ERROR''
04/20 07:57:17 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:17 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1619
04/20 07:57:17 yS1 removing lock file
--
04/20 07:57:17 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:17 yS1 check for lockfiles
04/20 07:57:17 yS1 checklock: stat failed, no file
04/20 07:57:17 yS1 locking the line
04/20 07:57:17 yS1 makelock(ttyS1) called
04/20 07:57:17 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:17 yS1 lock made
04/20 07:57:17 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:17 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:57:17 yS1 tss: set speed to 9600 (015)
04/20 07:57:17 yS1 tio_set_flow_control( HARD )
04/20 07:57:17 yS1 waiting for line to clear (VTIME), read: =
04/20 07:57:18 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:21 yS1 waiting for ``OK_''
04/20 07:57:21 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:21 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:21 yS1 found action string: ``ERROR''
04/20 07:57:21 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:21 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1620
04/20 07:57:21 yS1 removing lock file
--
04/20 07:57:21 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:21 yS1 check for lockfiles
04/20 07:57:21 yS1 checklock: stat failed, no file
04/20 07:57:21 yS1 locking the line
04/20 07:57:21 yS1 makelock(ttyS1) called
04/20 07:57:21 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:21 yS1 lock made
04/20 07:57:21 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:21 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:57:21 yS1 tss: set speed to 9600 (015)
04/20 07:57:21 yS1 tio_set_flow_control( HARD )
04/20 07:57:21 yS1 waiting for line to clear (VTIME), read: =
04/20 07:57:21 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:25 yS1 waiting for ``OK_''
04/20 07:57:25 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:25 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:25 yS1 found action string: ``ERROR''
04/20 07:57:25 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:25 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1621
04/20 07:57:25 yS1 removing lock file
--
04/20 07:57:25 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:25 yS1 check for lockfiles
04/20 07:57:25 yS1 checklock: stat failed, no file
04/20 07:57:25 yS1 locking the line
04/20 07:57:25 yS1 makelock(ttyS1) called
04/20 07:57:25 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:25 yS1 lock made
04/20 07:57:25 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:25 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:57:25 yS1 tss: set speed to 9600 (015)
04/20 07:57:25 yS1 tio_set_flow_control( HARD )
04/20 07:57:25 yS1 waiting for line to clear (VTIME), read: =
04/20 07:57:25 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:28 yS1 waiting for ``OK_''
04/20 07:57:28 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:28 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:29 yS1 found action string: ``ERROR''
04/20 07:57:29 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:29 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1622
04/20 07:57:29 yS1 removing lock file
--
04/20 07:57:29 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 07:57:29 yS1 check for lockfiles
04/20 07:57:29 yS1 checklock: stat failed, no file
04/20 07:57:29 yS1 locking the line
04/20 07:57:29 yS1 makelock(ttyS1) called
04/20 07:57:29 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 07:57:29 yS1 lock made
04/20 07:57:29 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR DCD
04/20 07:57:29 yS1 WARNING: DCD line still active, check modem settings =
(AT&Dx)
04/20 07:57:29 yS1 tss: set speed to 9600 (015)
04/20 07:57:29 yS1 tio_set_flow_control( HARD )
04/20 07:57:29 yS1 waiting for line to clear (VTIME), read: =
04/20 07:57:29 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 07:57:32 yS1 waiting for ``OK_''
04/20 07:57:32 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 07:57:32 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]ERROR
04/20 07:57:33 yS1 found action string: ``ERROR''
04/20 07:57:33 yS1 init chat failed, exiting...: Invalid argument
04/20 07:57:33 ##### failed in mg_init_data, dev=3DttyS1, pid=3D1623
04/20 07:57:33 yS1 removing lock file
--
04/20 08:02:34 yS1 mgetty: experimental test release 1.1.14-Apr02
04/20 08:02:34 yS1 check for lockfiles
04/20 08:02:34 yS1 checklock: stat failed, no file
04/20 08:02:34 yS1 locking the line
04/20 08:02:34 yS1 makelock(ttyS1) called
04/20 08:02:34 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 08:02:34 yS1 lock made
04/20 08:02:34 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR
04/20 08:02:34 yS1 tss: set speed to 9600 (015)
04/20 08:02:34 yS1 tio_set_flow_control( HARD )
04/20 08:02:34 yS1 waiting for line to clear (VTIME), read: =
04/20 08:02:34 yS1 send: \d\d\d+++\d\d\dAT&F&C1&D1S95=3D3[0d][0d]
04/20 08:02:37 yS1 waiting for ``OK_''
04/20 08:02:37 yS1 got: +++AT&F&C1&D1S95=3D3[0d]
04/20 08:02:37 yS1 CND: +++AT&F&C1&D1S95=3D3[0d][0d][0a]OK[0d]
04/20 08:02:38 yS1 CND: OK ** found **
04/20 08:02:38 yS1 send: AT&K3W0S7=3D60[0d][0d]
04/20 08:02:38 yS1 waiting for ``OK_''
04/20 08:02:38 yS1 got: [0a]AT&K3W0S7=3D60[0d]
04/20 08:02:38 yS1 CND: AT&K3W0S7=3D60[0d][0d][0a]OK[0d]
04/20 08:02:38 yS1 CND: OK ** found **
04/20 08:02:38 yS1 waiting for line to clear (VTIME), read: [0a]
04/20 08:02:38 yS1 removing lock file
04/20 08:02:38 yS1 waiting...
04/20 09:02:38 yS1 select returned 0
04/20 09:02:38 yS1 checking if modem is still alive
04/20 09:02:38 yS1 makelock(ttyS1) called
04/20 09:02:38 yS1 do_makelock: lock=3D'/var/lock/LCK..ttyS1'
04/20 09:02:38 yS1 lock made
04/20 09:02:38 yS1 mdm_send: 'AT'
04/20 09:02:38 yS1 got:AT[0d]
04/20 09:02:38 yS1 mdm_command: string 'AT'
04/20 09:02:38 yS1 got:[0d][0a]OK[0d]
04/20 09:02:38 yS1 mdm_command: string 'OK' -> OK
04/20 09:02:38 yS1 waiting for line to clear (VTIME), read: =
04/20 09:02:39 yS1 removing lock file
04/20 09:02:39 yS1 waiting...
--------------89A9E1DE8BEABECD1304ED49
Content-Type: text/plain; charset=us-ascii;
name="mgetty.config.Apl19"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="mgetty.config.Apl19"
#
# mgetty configuration file
#
# this is a sample configuration file, see mgetty.info for details
#
# comment lines start with a "#", empty lines are ignored
# ----- global section -----
#
# In this section, you put the global defaults, per-port stuff is below
# set the global debug level to "4" (default from policy.h)
debug 4
speed 38400
# use these options to make the /dev/tty-device owned by "uucp.uucp"
# and mode "rw-rw-r--" (0664). *LEADING ZERO NEEDED!*
port-owner uucp
port-group uucp
port-mode 0664
# ----- port specific section -----
#
# Here you can put things that are valid only for one line, not the others
#
## Zoltrix High-Speed (14.4k bts) Fax/Modem, try data only : (max. speed 19200)
port ttyS1
debug 9
data-only y
speed 9600
## --> Settings suggested by faqsample.config <-- ##
modem-type data
login-time 160
issue-file /etc/issue.net
## login-prompt \D\t\I\S\n\r
answer-chat "" ATA CONNECT \c
answer-chat-timeout 100
# Got this init chat from Len Ovens (len@studio.cbbs.org).
# You need the init-chat even for *dial-in*. This is the recommended way
# to init your modem.
## init-chat "" \d\d\d+++\d\d\dAT&F2w0s7=60s95=6MH#CID=0 OK <--SupraFax Modem only ##
## <<<<<<<<<<<<<<<<<<<<<< End of faqsample.config >>>>>>>>>>>>>>>>>>>>>>>>>>>> ##
## Init-string recommended by Zoltric High-Speed (14.4 btp) Fax/Modem is AT&F&C1&D1S95=3,
## and my init-chat is set as follow : -
init-chat "" \d\d\d+++\d\d\dAT&F&C1&D1S95=3\r OK\r AT&K3W0S7=60\r OK\r
## -------- Some options for Rockwell Chip used by MODEM -------- ##
## speed 38400
## switchbd 19200
ignore-carrier y
toggle-dtr n
## login-time 300
## prompt-waittime 2000
## answer-chat-timeout 80
term vt100
######################################################################################
# direct connection of a VT100 terminal which doesn't like DTR drops
#
port ttyS0
direct y
# speed 19200
speed 115200
## toggle-dtr n
ignore-carrier y
login-time 160
issue-file /etc/issue.net
login-prompt Dell-hkpc\t\t\D\t\I-LINE\t\S bps\n\rEnter your username:
--------------89A9E1DE8BEABECD1304ED49--