Vgetty (1.1.20) with USRobotics Sportster Flash
Niels Basjes (Niels@Basjes.nl.no.spamming)
Sat, 03 Apr 1999 16:41:39 GMT
Hi,
I've recently started with vgetty (mgetty 1.1.20) because I want to use my
USRobotics Sportster Flash as an answering machine.
I can record a message either by calling (without a welcome message) or
using vm record but playback goes wrong.
If someone calls my modem and I have a welcome message then only a second
or so of this message is played and then the modem hangs up.
I haven't been able to figure out what is wrong so if anyone can give me a
hint I would really appreciate it.
I've include the relevant section of the logfile after the RING has been
detected and at the bottom are the specs of my modem.
==============
04/02 22:48:09 yS1 vgetty: Installing signal handlers
04/02 22:48:09 yS1 voice command: 'AT#CLS?' -> ''
04/02 22:48:09 yS1 voice command: '' -> 'OK'
04/02 22:48:09 yS1 voice command: 'AT#CLS=8' -> 'OK'
04/02 22:48:09 yS1 voice command: 'AT' -> 'OK'
04/02 22:48:10 yS1 voice command: 'AT#VLS=0' -> 'OK|VCON'
04/02 22:48:10 yS1 voice command: 'AT#VLS=4A' -> 'VCON'
04/02 22:48:10 yS1 playing voice file /var/spool/voice/messages/welkom.rmd
04/02 22:48:10 yS1 vgetty: raw modem data header found
04/02 22:48:10 yS1 vgetty: modem type US Robotics found
04/02 22:48:10 yS1 vgetty: compression method 0x0001, speed 8000, bits 8
04/02 22:48:10 yS1 voice command: 'AT' -> 'OK'
04/02 22:48:10 yS1 tio_set_flow_control( HARD XON_OUT )
04/02 22:48:10 yS1 voice command: 'ATE0#VTX' -> 'CONNECT'
04/02 22:48:12 yS1 voice command: '' -> 'OK|VCON'
04/02 22:48:13 yS1 voice command: 'AT' -> 'OK'
04/02 22:48:13 ##### hangup requested, name='', caller=none, dev=ttyS1,
pid=7572
04/02 22:48:13 yS1 voice command: 'AT#VLS=0H0' -> 'OK|VCON'
04/02 22:48:13 yS1 vgetty: leaving voice mode
04/02 22:48:13 yS1 voice command: 'AT#CLS=2.0' -> 'OK'
04/02 22:48:13 yS1 voice command: 'AT' -> 'OK'
04/02 22:48:14 yS1 vgetty: Restoring signal handlers
04/02 22:48:14 yS1 closing voice modem device
04/02 22:48:14 yS1 removing lock file
==============
My modem gives this information:
ATI0 --> 5601
ATI1 --> B567
ATI3 --> U.S. Robotics 56K Voice EXT Rev. 12.1.0
ATI7 --> Configuration Profile...
Product type Netherlands External
Product ID: 15166301
Options V32bis,V.34+,x2,V.90
Fax Options Class 1/Class 2.0
Voice Options Speakerphone, TAD
Clock Freq 92.0Mhz
EPROM 256k
RAM 64k
FLASH date 4/17/98
FLASH rev 12.1.0
DSP date 4/17/98
DSP rev 12.1.0
Niels.
--
ir. Niels Basjes -- ICQ# 9012768 -- PGP Key ID=0xE7BBF6B9
mailto:`echo 'Niels Basjes'|awk '{print$1"@"$2".nl"}'`
http://www.wirehub.nl/~basjesn
"The box said: 'install on Windows 95, NT 4.0 or better'. So I installed it on Linux."