RAS Server

Joddy Grider (joddyg@inlandtruck.com)
Fri, 02 Apr 1999 09:05:22 -0600
Messages sorted by:[ date ][ thread ][ subject ][ author ]
Gert Doering wrote:

> Hi,
>
> On Thu, Apr 01, 1999 at 05:06:37PM -0600, Joddy Grider wrote:
> > > Hmmm.  Now this sounds to me like a PPP setup problem, always handing out
> > > the same IP address to the other end.  You need to set up PPP so that
> > > every modem line gets a different remote IP address.
> >
> > the error log shows the following:
> > init chat failed, exiting...: Interrupted system call ##### failed in mg_init_data,
> > dev=ttyQ1a12, pid=2050
>
> This should be pretty unrelated.  Unless there is a bug in the serial
> driver for the Equinox board [or mgetty is setup wrongly - check inittab],
> nothing that one modem can do should affect mgetty's communication with a
> different modem line.
>
> As for pppd, interactions *are* possible if the IP addresses for different
> lines collide.  For normal serial connections, no way.
>
> gert
> --
> USENET is *not* the non-clickable part of WWW!
>                                                            //www.muc.de/~gert/
> Gert Doering - Munich, Germany                             gert@greenie.muc.de
> fax: +49-89-35655025                        gert.doering@physik.tu-muenchen.de

Thanks for the help atleast it points me in the right direction for what to continue the
search for.
                Thanks Again
                    Joddy Grider